Fingerprint Sensor - Toshiba Satellite R20 User Manual

Problem
The mouse pointer
moves too fast or too
slow
The mouse pointer
moves erratically

Fingerprint Sensor

Problem
Reading of the
fingerprint was not
successful.
The fingerprint cannot
be read due to injuries
to the finger.
User's Manual
Procedure
Try changing the speed setting in the mouse
control utility.
1. Click start, click Control Panel, click
Printers and Other Hardware and select
Mouse icon.
2. Click the Pointer Options tab.
3. Set the speed as required and click OK.
The mouse might be dirty. Refer to your mouse
documentation for instructions on cleaning.
If problems persist, contact your dealer.
Procedure
Try again using the correct posture. Align your
fingertip with the sensor as shown in the drawing
and swipe. Refer to
in Chapter 4, Operating Basics.
Try the recognition process again using another
enrolled finger.
Try the recognition process again using another
enrolled finger.
If fingerprints from all the enrolled fingers cannot
be read, please logon by using the keyboard to
input the password for the time being.
If problems persist, contact your dealer.
Troubleshooting
Using the Fingerprint Sensor
8-16