Toshiba Satellite R20 User Manual page 81

The slot A is reserved for main memory. Use the slot B for expanded
memory. If only one card is installed, use the slot A.
10. Fit the memory module's connectors into the socket at about a 45
degree angle and push the module down until latches on either side
snap into place.
Align the notch of the memory module with that of the memory slot and
gently insert the module into the slot.
Slot B
11. Screw in the two screws and replace the memory module cover.
12. Tuck the keyboard ribbon cable into the groove under the palm rest.
Keyboard ribbon
cable
User's Manual
Figure 3-12 Installing the memory module
Figure 3-13 Seating the memory module cover
Figure 3-14 Tuck the keyboard ribbon cable
Features, Utilities and Options
Slot A
Screws
Memory module
cover
3-25