Initial Settings; Adjusting Initial Settings - Pioneer FH-P4000 Operation Manual

Initial Settings

Adjusting initial settings

LOUD LOUD
1 2 3 4
3
6
7
1
3
ENT ENT DISP DISP CLOCK CLOCK
D F
SOURCE / OFF SOURCE / OFF
A
5 6
2 6 5 4
5
4
Initial settings lets you perform initial set up of
different settings for this unit.
1 display
FUNCTION
Shows the function status.
2 button
SOURCE/OFF
Press and hold to turn off the unit.
3 button
FUNCTION
Press to select a function of the initial set-
tings.
4 2/3 buttons
Press to choose the item (mode) of the
selected function.
5 5/∞ buttons
Press to adjust the selected function and
turn it on/off.
6 button
BAND/ESC
Press to cancel initial settings.
7
CD/CASSETTE/TUNER
Press repeatedly to turn off the unit.
1 Press
SOURCE/OFF
unit, or press
CD/CASSETTE/TUNER
remote, repeatedly until the unit turns off.
2 Press and hold until the time
FUNCTION
setting appears in the display.
3 Press to select one of the initial
FUNCTION
settings.
Press repeatedly to switch between
FUNCTION
the following settings:
— — —
TIME WARN AUX
—
DIG.ATT CONTRAST
Use the following instructions to operate each
particular setting.
• To cancel initial settings, press
• You can also cancel initial settings by holding
down until the unit turns off.
FUNCTION
button
and hold on the head
on the
— —
DIMMER REAR SP
.
BAND/ESC
En
Section
10
39