Storing And Recalling Broadcast Frequencies; Tuning In Strong Signals - Pioneer FH-P4000 Operation Manual

Tuner
1 display
FUNCTION
Shows the function status.
2 indicator
PRESET NUMBER
Shows what preset has been selected.
3 button
FUNCTION
Press to select an advanced function.
4 (
1–6 PRESET TUNING
Press for one-button selection of radio sta-
tions you have entered into memory. To store
a radio station, press and hold.
5 5/∞ buttons
Press to select frequencies stored in mem-
ory and turn the selected function on/off.
6 2 / 3 buttons
Press to choose the item (mode) of the
selected function.
7 button
BAND/ESC
Press to return to the frequency display.
Press to display the function
FUNCTION
names.
Press repeatedly to switch between
FUNCTION
the following functions:
(best station memory)—
BSM
tuning)
• To return to the frequency display, press
BAND/ESC.
Note
• If you do not operate the function within about
30 seconds, the display is automatically
returned to the frequency display.
) buttons
(local seek
LOCAL
Storing and recalling broadcast
frequencies
If you press any of the
PRESET TUNING
you can easily store up to six broadcast frequen-
cies for later recall with the touch of a button.
When you find a frequency that you want to
store in memory press a
ton and hold until the preset number stops
flashing
.
The number you have pressed will flash in the
indicator and then remain lit.
PRESET NUMBER
The selected radio station frequency has been
stored in memory.
The next time you press the same
button the radio station frequency is
ING
recalled from memory.
Notes
• Up to 18 FM stations, 6 for each of the three
FM bands, and 6 AM stations can be stored in
memory.
• You can also use 5 and ∞ to recall radio sta-
tion frequencies assigned to
buttons.

Tuning in strong signals

Local seek tuning lets you tune in only those
radio stations with sufficiently strong signals for
good reception.
1 Press to select
FUNCTION
Press until
FUNCTION
display.
2 Press 5 to turn local seek tuning on.
Local seek sensitivity (e.g.,
the display.
3 Press 2 or 3 to set the sensitivity
buttons
but-
PRESET TUNING
PRESET TUN-
PRESET TUNING
.
LOCAL
appears in the
LOCAL
) appears in
LOCAL 2
.
En
Section
04
13