Introduction Of Advanced Multi-Cd Player Operation - Pioneer FH-P4000 Operation Manual

Multi-CD Player
2 Use to adjust the sound level.
VOLUME
When you press
VOLUME
raised and when pressed down/–, the volume is
lowered.
3 Select a disc you want to listen to with the
to buttons.
1 6
For discs located at 1 to 6, press the correspond-
ing number button.
If you want to select a disc located at 7 to 12,
press and hold the corresponding numbers
such as for disc 7, until the disc number
1
appears in the display.
• You can also sequentially select a disc by
pressing 5/∞.
4 To perform fast forward or reverse, press
and hold 2 or 3 .
5 To skip back or forward to another track,
press 2 or 3 .
Pressing 3 skips to the start of the next track.
Pressing 2 once skips to the start of the current
track. Pressing again will skip to the previous
track.
Notes
• When the multi-CD player performs the
preparatory operations,
• If the multi-CD player does not operate prop-
erly, an error message such as
be displayed. Refer to the multi-CD player
owner's manual.
• If there are no discs in the multi-CD player
magazine, is displayed.
NO DISC
up/+, the volume is
is displayed.
READY
may
CD ERR-14
Introduction of advanced multi-
CD player operation
LOUD LOUD
1 2 3 4
6
2
5
1
2
ENT ENT DISP DISP CLOCK CLOCK
D F
SOURCE SOURCE / OFF / OFF
A
5 6
5 3 4
3
4
En
Section
07
25