Hp Proliant Dl360 G6 Pci Thermal - Power Option - HP DL360 User Manual

Remove the full-length PCIe riser board from the riser board assembly.
6.
Install the PCI-X riser board on the riser board assembly.
7.
IMPORTANT:
expansion board before inserting the board into the expansion slot of the PCI riser board
assembly.
Install the expansion boards, if necessary.
8.
Install the PCI riser board assembly (on page 25).
9.
IMPORTANT:
properly.
Connect all internal cabling to the expansion boards.
10.
Install the access panel (on page 22).
11.
Slide the server into the rack.
12.
Power up the server (on page 20).
13.

HP ProLiant DL360 G6 PCI thermal - power option

The HP ProLiant DL360 G6 PCI thermal - power option kit provides a PCI power cable and a fan that are
required when installing a high-power graphics adapter (150W) on the server.
If the expansion board ships with an extender bracket, remove it from the
The server does not power up if the PCI riser board assembly is not seated
Hardware options installation 61