Systems Insight Display Led Combinations - HP DL360 User Manual

Item Description
All other LEDs

Systems Insight Display LED combinations

When the health LED on the front panel illuminates either amber or red, the server is experiencing a
health event. Combinations of illuminated Systems Insight Display LEDs, the system power LED, and the
health LED indicate system status.
Systems Insight Display
LED and color
Processor (amber)
Processor (amber)
DIMM (amber)
DIMM (amber)
Overtemperature (amber) Amber
Overtemperature (amber) Red
Riser interlock (amber)
Fan (amber)
Fan (amber)
Power supply (amber)
Status
Amber = Failure
Off = Normal
For possible failure causes, see "Systems
Insight Display LED combinations (on
page 15)."
Health LED System power
LED
Red Amber
Amber Green
Red Green
Amber Green
Green
Amber
Red Green
Amber Green
Red Green
Red Amber
Status
One or more of the following conditions
may exist:
•
Processor in socket X has failed.
•
Processor X is not installed in the socket.
•
Processor X is unsupported.
•
ROM detects a failed processor during
POST
Processor in socket X is in a pre-failure
condition.
One or more DIMMs have failed.
DIMM in slot X is in a pre-failure condition.
The Health Driver has detected a cautionary
temperature level.
The server has detected a hardware critical
temperature level.
The PCI riser board assembly is not seated
properly.
One fan has failed or has been removed.
Two or more fans have failed or been
removed.
•
Only one power supply is installed and
that power supply is in standby.
•
Power supply fault
•
System board fault
Component identification 15