Disable Snmp; Snmp Community Name; Disable Telnet Setup; Disable Tftp Firmware Upgrade - Lantronix XPress DR+ User Manual

Hide thumbs Also See for XPress DR+:

Table of Contents

Disable SNMP

This setting allows you to disable the SNMP protocol on the unit for security reasons.

Disable SNMP (N) ? _

The SNMP Community Name is a required field for NMS to read or write to a device.

Enter a string of 1 to 13 characters.

SNMP Community Name (public): _

The default entry is public. The current value is displayed in parentheses.

Note:

If you choose to disable this option, keep in mind that disabling both

Telnet Setup and Port 77FE will prevent users from accessing Setup Mode from

the network.

This setting defaults to the N (No) option. The Y (Yes) option disables access to Setup

Mode by Telnet (port 9999). It only allows access locally using the web pages and the

serial port of the unit.

Disable Telnet Setup (N) ? _

This setting defaults to the N (No) option. The Y (Yes) option disables the use of TFTP to

perform network firmware upgrades. With this option, you can download firmware

upgrades over the serial port using DeviceInstaller's Recover Firmware procedure. (See

10: Firmware

XPress DR+ User Guide

Upgrades.)

9: Setup Mode: Advanced Settings

Table of Contents