Lanier LD 035 Operator's Manual page 117

AdonisC3_GBcopyF_FM1.book Page 102 Thursday, November 28, 2002 1:53 PM
User Tools (Copier/Document Server Features)
❖ ❖ ❖ ❖ Auto Sort
You can specify whether Sort
mode is selected when the ma-
chine is turned on or the mode is
cleared.
Default: No
❖ ❖ ❖ ❖ Memory Full Auto Scan Restart
When memory becomes full while
scanning originals, the machine
can make copies of scanned origi-
nals first, and then automatically
proceed scanning remaining origi-
nals.
You can enable or disable this
4
function.
Note
❒ If you select [No] :
• When memory becomes full,
the machine stops operation
allowing you to remove the
copy pages delivered on the
output tray.
❒ If you select [Yes] :
• You can leave the machine
unattended to make copies,
but sorted pages will not be
sequential.
❒ Default: No
❖ ❖ ❖ ❖ Select Stack Function
Specify whether Stack or Rotate
Sort has priority to be shown on
the initial display.
Note
❒ Default: Stack
❒ An optional finisher is required
to use this function.
102
❖ ❖ ❖ ❖ Select Stapling Position
Specify which Top 2 staples or Bot-
tom is shown on the initial display
with priority.
Note
❒ Default: Top 2
❒ The optional 2 Tray finisher or
booklet finisher is required to
use this function.
❖ ❖ ❖ ❖ Select Punch Type
Specify which punch type (2 holes
or 3 holes) has priority to be shown
on the initial display.
Note
❒ Default: 2 holes
❒ The optional 2 Tray finisher
equipped with the punch func-
tion is required.
❖ ❖ ❖ ❖ Letterhead Setting
If you select [Yes] in this function,
the machine rotates the image cor-
rectly.
Note
❒ Default: No
❒ Orientation-fixed (top to bot-
tom) or two-sided paper might
not be printed correctly de-
pending on how the originals
and paper are placed.
Reference
When using letterhead paper,
be careful of the paper orienta-
tion. See "Orientation–Fixed Pa-
per or Two-Sided Paper"in
"Loading Paper", General Set-
tings Guide.