Placing Originals On The Exposure Glass - Lanier LD 035 Operator's Manual

AdonisC3_GBcopyF_FM1.book Page 11 Thursday, November 28, 2002 1:53 PM
B B B B
Select the original orientation.
Standard orientation
A Make sure that
ed.
90° turn
A Place your original in the land-
scape orientation, and then
press
C C C C
Press [OK].
is select-
.
Placing Originals on the
Exposure Glass
A A A A
Lift the exposure glass cover or
the ADF.
Important
❒ Do not lift the exposure glass
cover or the ADF forcefully.
Otherwise, the cover of the ADF
might open or be damaged.
Note
❒ Be sure to lift the exposure glass
cover or the ADF by more than
30°. Otherwise, the size of the
original might not be detected
correctly.
B B B B
Place the original face down on
the exposure glass. The original
should be aligned to the rear left
corner.
1.
Reference mark
2.
Left scale
Note
❒ Start with the first page to be
copied.
C C C C
Lower the exposure glass cover or
the ADF.
Placing Originals
1
11