Installing in Windows 95
Follow the steps below to install the printer software in
1. Make sure Windows 95 is running and the printer is off.
2. Insert the printer software CD shipped with your printer in
the CD-ROM drive. Click Install in the dialog box that
appears, shown below.
If this dialog box does not appear when you insert the printer
software CD, double-click the My Computer icon, then
double-click the CD-ROM drive icon (or floppy disk drive
icon if using the floppy disk version). If the dialog box
shown above still does not appear, double-click the
Setup.exe icon. You may need to use the arrows to scroll
through the folder to find it.
If you wish to make a floppy disk version of the printer software
included on your CD-ROM, click the Driver disk creation
utility button and follow the on-screen instructions.