Epson Stylus COLOR 800 User Manual page 185

The factory default settings are designed to meet the needs of most users,
so you may not need to change them. The table below lists the features
you can select in the default-setting mode.
Settings
Print direction
Font
Pitch
I/F mode
Auto I/F wait time
Software
Auto CR (IBM mode
only)
AGM (IBM mode only)
Character table
Auto line feed
Network I/F mode
Loading position
Economy
Parallel I/F transfer rate
For more details, see the next section, "Using the default settings." To
change a setting, see "Changing the default settings" on page A-7.
Note:
Most software controls the character table and auto line feed. If your software
controls these features, you may never need to set them with the control panel.
Options
Auto, Bi-D, Uni-D
Courier, Roman, Sans Serif, Prestige, Script,
Roman T, Sans Serif H, Draft
10 cpi, 12 cpi, 15 cpi, 17.1 cpi, 20 cpi,
Proportional
Auto, Parallel, Serial, Option
10 seconds, 30 seconds
ESC/P 2, IBM X24E
Off, On
Off, On
PC437, PC850, PC860, PC861, PC863, PC865,
Abicomp, BRASCII, Roman 8,
ISO Latin 1, Italic U.S.A., Italic France,
Italic Germany, Italic U.K., Italic Denmark 1,
Italic Sweden, Italic Italy, Italic Spain 1
Off, On
Off, On
8.5 mm, 3 mm, Others
Off, On
Fast, Normal
Using the Printer with DOS
A
A-3