Epson Stylus COLOR 800 User Manual page 150

Your software is not properly
set up for your printer.
Nothing prints and the control panel lights are on or flashing.
Cause
Several common printer
errors have occured at once.
The printer sounds like it is printing, but nothing prints.
Cause
The print head nozzles are
clogged.
One or both of the ink
cartridges have been used
longer than six months or
beyond the date on the
packaging.
10-10
Troubleshooting
Make sure that your printer is
properly selected in your software.
Install or reinstall the printer software
as described in Chapter 2.
What to do
Use the table in "Error indicators"
earlier in this chapter to determine
what combination of errors may have
occurred, and apply the recommended
solutions.
What to do
Clean the print heads. See "Cleaning
the Print Heads," later in this chapter.
If this does not work after four or five
trials, see below.
Try cleaning the print heads. If that
does not solve the problem, replace the
ink cartridges as needed. If the or
ink out light is not on or flashing, see
"Ink Cartridge Problems," on page
10-32 to replace the ink cartridge.