Epson Stylus COLOR 800 User Manual page 19

Buttons
Buttons
-
2
load/eject
power
;
black print
head cleaning
X
color print
head cleaning
Lights
The lights on the front of the printer indicate the printer status,
such as receiving data, paper jam, or ink is low. The following
table describes what the lights mean.
5
- - -
N
- -
F O O
F
- -
N
- -
F
- -
N
- -
N O F
= on, = off, = flashing, - = irrelevant
Function
Loads and ejects paper. Starts charging ink (after you
finish the ink cartridge replacement procedure).
Turns the printer on and off. Clears the print buffer if
pressed twice while the power is on.
Cleans the black print head if pressed for about three
seconds. Starts the black ink cartridge replacement
procedure if pressed while the ink out light is flashing
or on. This button is located inside the printer cover.
Cleans the color print head if pressed for about three
seconds. Starts the color ink cartridge replacement
procedure if pressed while the
or on. This button is located inside the printer cover.
Printer Status
Receiving data, replacing an ink cartridge,
F
charging ink, or cleaning print heads.
Paper out. Load paper in the sheet feeder; then
-
press the load/eject button to resume printing.
Paper jam. Turn off the printer and gently pull all
-
the paper out of the printer.
Ink low. The black ink cartridge is nearly empty.
Obtain a replacement black ink cartridge
-
(S020108).
Ink out. The black ink cartridge is empty.
-
Replace the black ink cartridge (S020108).
Ink low. The color ink cartridge is nearly empty.
Obtain a replacement color ink cartridge
-
(S020089).
Ink out. The color ink cartridge is empty.
-
Replace the color ink cartridge (S020089).
ink out light is flashing
Getting to Know Your Printer
1
1-3