Table of Contents
Advertisement
Series of operations
You can use the SeriesOperations function to set up to three
operating modes and then start.
Requirement: you must set a cooking time for each step.
Can be used with
All types of heating
■
Exception: "MicroCombi gentle" and "MicroCombi intensive"
heating types are not suitable.
Microwave
■
Combination operation
■
Ovenware
Always use microwave-safe, heat-resistant ovenware.
Setting a series of operations
Press the
2
button.
1.
series of operations appears on the status bar. The 1 is
2
highlighted. The first operation in the series can be set.
Time-setting options
You can call up the time-setting options menu by pressing
the
button. The following functions are available:
0
If the oven is switched off:
Setting the timer
■
Setting the clock
■
If the oven is switched on:
Setting the timer
■
Setting the cooking time
■
Setting a later end time
■
Setting the timer
The timer runs independently of the oven. You can use it as a
kitchen timer and set it at any time.
Press the
button.
0
1.
The time-setting options menu opens.
Set the running time for the timer using the rotary selector.
2.
Press the
button to close the menu.
0
3.
The display returns to its previous state. The
timer appears, and the time can be seen counting down.
When the time has elapsed
A signal sounds. The display shows
the signal earlier by pressing the
to close the time-setting options menu.
Cancelling the timer time
Open the time-setting options menu using the
turn the time back to 0:00. Press the
menu.
12
U
symbol for the
U
0:00. You can cancel
0
button. Press the
0
button
0
button and
0
button to close the
Select and set the desired operating mode.
2.
Press the
2
button again.
3.
The 2 is highlighted. The second operation in the series can
be set.
Select and set the desired operating mode.
4.
Press the
button again.
2
5.
The 3 for the third operation in the series is highlighted:
Select and set the desired operating mode.
6.
Press the
button.
†
7.
Appliance operation begins. The operation in the series
currently in progress and the cooking time appear in the status
bar on the left-hand side. On the right, you will see the total
cooking time counting down.
The cooking time has elapsed
A signal sounds. The series of operations is finished. The status
bar shows
0:00. You can cancel the signal before it has
x
finished sounding by pressing the
Changing the timer time
Open the time-setting options menu with the
change the running time for the timer in the next few seconds.
Press the
0
button to close the menu.
Setting the cooking time
If you set the cooking time for your dish, operation stops
automatically once this time has elapsed. The oven stops
heating.
Prerequisite: The type of heating and temperature must be set.
Example in the picture: setting for top/bottom heating, 180 °C,
cooking time of 45 minutes.
Press the
0
button.
1.
The time-setting options menu appears.
7LPHU
PLQ VHF
Using the
or
button, move to the cooking time and set
¿
¾
2.
the cooking time using the rotary selector.
7LPHU
PLQ VHF
button.
0
button and
0
&RRNLQJ WLPH
PLQ VHF
&RRNLQJ WLPH
PLQ VHF
Hide quick links:
Advertisement
Table of Contents
