Installing The Cpu - Nexcom NDiS 542 User Manual

Chapter 3: System Setup

Installing the CPU

1. Loosen the screws that secure the heat sink to the chassis.
• Make sure all power cables are unplugged before you install the
CPU.
CAUTION! CAUTION! CAUTION!
• The CPU socket must not come in contact with anything other
than the CPU. Avoid unnecessary exposure.
Copyright © 2012 NEXCOM International Co., Ltd. All Rights Reserved.
2. Now remove the heat sink to access the CPU socket.
Remove
screw
Heat sink
26
Bottom Side of the Heat Sink
NDiS 542 User Manual