Nexcom NDiS 120 User Manual page 39

Chapter 3: System Setup
5. Connect one end of the SATA power cable to the SATA power connec-
tor that is on the board then connect the other end of the cable to the
SATA power connector at the rear of the SATA drive.
Cable connected to the
SATA power connector
on the board
Copyright © 2008 NEXCOM International Co., Ltd. All Rights Reserved.
SATA power
cable
Cable connected
to the SATA drive
6. Connect one end of the SATA data cable to the SATA connector that is
on the board then connect the other end of the cable to the SATA con-
nector at the rear of the SATA drive.
Cable connected
to the SATA
connector
on the board
26
Cable
connected
to the SATA
drive
SATA data cable
NDiS 120 User Manual