Nexcom NDiS 120 User Manual page 38

Chapter 3: System Setup
3. Position the HDD brackets on each side of the SATA drive. Align the
mounting holes that are on the sides of the SATA drive with sides of
the HDD brackets' mounting holes.
HDD bracket
Top of SATA Drive
HDD bracket
Bottom of SATA Drive
Copyright © 2008 NEXCOM International Co., Ltd. All Rights Reserved.
4. Place the SATA drive into the chassis. Align the mounting holes of the
HDD bracket
HDD bracket
25
HDD brackets with the mounting studs in the chassis then use the
provided screws to secure the drive to the chassis.
Mounting
hole
Mounting
hole
Mounting
hole
Mounting
hole
SATA
drive
Mounting
screw
NDiS 120 User Manual