Viewing The Software Licences; Setting The Digital Audio; Colour Decoding; Dynamic Range Control - Toshiba 46WL700A Owner's Manual

Viewing the Software Licences

The licences for the software used in this TV are available
for viewing on screen�
1
From the SETUP menu, press s or r until
Software Licences is selected�
2
Press �
A screen will appear displaying all of the licencing
information required for the TV's software�

Setting the Digital Audio

Digital Audio Output
1
From the PREFERENCES menu, press s or r
until AV Connection is selected, and then press
2
Press s or r to select Digital Audio Output �
AV Connection
Input Labeling
PC/HDMI 2 Audio
Side Shared Audio
HDMI 2 Audio
HDMI Settings

Colour Decoding

Digital Audio Output
3
Press v or w to select Auto or PCM
Auto : This mode outputs Dolby Digital or PCM to
the digital audio output socket providing it is
being broadcast�
PCM : Select this when a 2ch digital stereo amplifier is
connected to the TV� When you select a Dolby
Digital or MPEG audio track, the sound is
converted to the PCM (2ch) format and output�

Dynamic Range Control

This feature allows control of audio compression for
digital TV programmes excluding those with MPEG-1 and
MPEG-2 audio�
1
From the SOUND menu, press s or r to select
Dynamic Range Control �
2
Press v or w to select On or Off �
44
Other Digital TV features and settings
�
PC
EXT 2
Digital
Auto
Auto
Colour Decoding
If you view the DVDs with this TV, the Colour Decoding
option may be set for ensuring the colourimetry
reproduction�
1
From the AV Connection menu, press s or r to
select Colour Decoding �
2
Press v or w to select Auto , BT.709 or BT.601 �
Note:
Normally set this feature to Auto (BT.611 and
BT.719 modes changes for the better colourimetry.
When receiving a normal signal and selecting
BT.611 and BT.719 modes, it may not be displayed
of correct colourimetry on the screen).