Viewing The Software Licences; Setting The Digital Audio; Digital Audio Output; Dynamic Range Control - Toshiba 32SL800A Owner's Manual

Note:
If the network is not available, a warning
message will appear.
3
The TV software upgrade will start when download
succeeds�

Viewing the Software Licences

The licences for the software used in this TV are available
for viewing on screen�
1
From the System Setup menu, press s or r until
Software Licences is selected�
2
Press OK�
A screen will appear displaying all of the licencing
information required for the TV's software�

Setting the Digital Audio

Digital Audio Output

When connecting a surround sound amplifier to the digital
audio output, the following options can be selected or
adjusted�
1
From the Preferences menu, press s or r to select
AV Connection and press OK�
2
Press s or r to select Digital Audio Output�
AV Connection
Input Labeling
PC/HDMI 3 Audio
HDMI 3 Audio
HDMI Settings
Digital Audio Output
3
Press OK to display Digital Audio Format menu
and press s or r to select an option�
Audio Format:
Press v or w to select PCM or Auto�
PCM: This mode outputs PCM format to the digital
audio output socket�
Auto: This mode outputs Dolby Digital (if available)
or PCM to the digital audio output socket�
Dolby Digital  Dolby Digital
Dolby Digital Plus  Dolby Digital
MPEG  PCM
HE-AAC  Dolby Digital
40
Other Digital TV features and settings
Audio Delay:
Press v or w to select Auto or Manual�
Delay Adjustment:
Press v or w to adjust the audio signal timing (0 - 250
ms) to meet the video signal timing�
Notes:
• This feature is greyed out when Audio Delay is in
• A time lag will occur when the video signal or audio
• When adjusting the timing, turn down the volume
• Depending on the connected equipment (amplifier,
• When the optical digital output setting (AutoPCM)
• Do not use other than for audio output from the AV
PC

Dynamic Range Control

Digital
This feature allows control of audio compression for
digital TV programmes excluding those with MPEG-1 and
MPEG-2 audio�
1
2
Note:
This feature will automaticallly switch Off when
Dolby Volume is set to Low or High.
Auto: This mode automatically adjusts the audio
timing to meet the video timing�
Note: The time lag might be large between the
image and sound depending on the connected
equipment (amplifier etc.). In that case, select
Manual�
Manual: You can manually adjust the audio signal
timing to meet the video signal timing�
Auto.
signal is changed. Adjust the timing accordingly.
of the AV equipment used as far as possible.
Depending on the equipment, noise etc. may occur
when the signal is changed.
etc.), adjustment may not be possible.
is changed, it may be necessary to adjust the
timing again.
amplifier, etc. (Malfunction may occur)
From the Sound menu, press s or r to select
Dynamic Range Control�
Press v or w to select On or Off�