Toshiba 46WL700A Owner's Manual page 54

Easy Setup using PIN (Personal Identification
Number)
1
From the PREFERENCES menu, select Network
Setup and press
2
Press s or r to select Wireless Setup , and press
�
3
Press s or r to select Easy Setup , and press
4
Press v or w to select PIN �
5
Press s to select Start Scan , and press
6
Press s or r to select the desired AP and press
Note:
Check the MAC address on the label of the AP
or in the manual, and select your AP.
7
When the PIN code window appears, enter the
displayed PIN into your AP, and then press Next to
continue the PIN Setup� When a message displays to
report that the setup is complete, press
To cancel searching for the AP:
Press while searching for the AP� A message will
RETURN
appear, then press v or w to select Yes and press
Assisted Setup
1
From the PREFERENCES menu, select Network
Setup and press
2
Press s or r to select Wireless Setup , and press
�
3
Press s or r to select Assisted Setup , and press
�
Wireless Setup
Easy Setup
Assisted Setup
Manual Setup
4
Press s or r to select the desired AP and press
Note:
Check the MAC address on the label of the AP
or in the manual, and select your AP.
5
Select Security Key and press
Keyboard window will appear�
6
Input the Security Key by using the Software
Keyboard ( - page 57)� To save your setting, press
the BLUE button�
Note:
The Security Key must adhere to these
conditions:
- TKIP/AES: 8-63 ASCII or 64 Hex characters
- WEP: 5 or 13 ASCII or 10 or 26 Hex characters
54
Connecting your TV
�
�
�
�
On
� The Software
7
Press s or r to select Key ID , and then press v or
w to select 1 , 2 , 3 , 4 �
Note:
When Encryption is set to WEP, this option is
available.
8
Select Done , and then press
Note:
�
If Network Name is not displayed, see step 4
and 5 in Manual Setup below to set Network
Name before pressing Done.
Note:
�
Settings are not saved if
Done is selected.
Manual Setup
1
From the PREFERENCES menu, select Network
Setup and press
2
Press s or r to select Wireless Setup , and press
�
3
Press s or r to select Manual Setup , and press
�
�
Wireless Setup
Easy Setup
Assisted Setup
Manual Setup
4
Press s or r to select Network Name , and press
� The Software Keyboard window will appear�
5
Input the Network Name by using the Software
Keyboard ( - page 57)� To save your setting, press
the BLUE button�
6
Press s or r to select Authentication , and then
press v or w to select Open System , Shared Key ,
WPA-PSK or WPA2-PSK �
7
Press s or r to select Encryption , and then press
v or w to select None , WEP , TKIP or AES �
�
Notes:
• Certain encryption types are only compatible with
specific authentication types.
- When Authentication is Open System, only WEP
or None is compatible.
- When Authentication is Shared Key, only WEP is
compatible.
- When Authentication is WPA-PSK or WPA2-PSK,
only TKIP or AES is compatible.
• When incompatible Authentication/Encryption
pairings are detected, a warning message will be
displayed, and no connection attempt will be made
until the incompatibility is resolved.
• There is only one key ID to set for WEP encryption.
�
is pressed before
RETURN
�
On