Turning The Tv On; Switching On The Tv; Switching Off The Tv; Store Mode - Toshiba 46WL700A Owner's Manual

Turning the TV on

Switching on the TV

Connect the power cord to a wall outlet� The 1 power
indicator light should be red (standby mode)�
1
Press on the remote control or the Touch Keys on
the TV front panel� The 1 power indicator lights in
blue�
Note:
If you watch black and white programmes when the
Colour System mode is set to Auto, colour noise
may appear on the screen. In this case select the
appropriate Colour System (For the system of each
country or region, refer to page 18).

Switching off the TV

1
Press on the remote control or the Touch Keys on
the TV front panel to switch to the standby mode�
Notes:
• The TV is not fully disconnected from the main
supply, as minute current is consumed even when
is turned off. When the TV will not be used for
a long period of time, such as during vacation or
travel, remove the power plug from the wall outlet.
• If power is cut off while you are viewing the TV,
the Last Mode Memory function turns on the TV
automatically when power is applied again. If
power is going to be off for a long time and you are
going to be away from your TV, unplug the power
cord to prevent the TV from turning on in your
absence.

Tuning the TV for the first time

Before switching on the TV, put your decoder and media
recorder to standby, if they are connected, and ensure that
the aerial is connected� To setup the TV, use the buttons on
the remote control as detailed on page 12�
1
Press the button� The Menu Language screen
will appear. This screen will appear the first time that
the TV is switched on and each time " Reset TV " ( -
page 35) is executed�
Menu Language
2
Press v or w to select the menu language English or
Français �
3
Press to display the Country menu, press s or r
to select Australia or New Zealand ( - page 74)�
New Zealand :
14
English
Getting started
Time Zone and Bandwidth menu are not available�
Note:
The Country menu can also be displayed at any
time from the SETUP menu.
4
Press
press v or w to select the item you want to set� (New
South Wales, Northern Territory, Queensland, South
Australia, Tasmania, Victoria, Western Australia or
Australian Capital Territory)
5
Press
20)�
Press v or w to select Home or Store � For normal
home use, select Home �
Location
To use the TV for displaying in a store showroom, please
select [Store]. [Home] mode is recommended for normal
use.

Store mode:

• A confirmation menu will appear.
• AutoView menu is not available�
6
Press
v or w to select Stand or Wall �
TV Mounting
If you are mounting the TV on a wall please select [Wall].
[Stand] is recommended for other uses.This setting may be
modified later under Sound Navigation in the SOUND menu.
7
Press
23)�
Press v or w to select Yes or No �
AutoView
AutoView mode automatically adjusts picture settings to
suit ambient light conditions.
Do you wish to enable AutoView mode?
8
Press
Use v or w to select DTV and ATV , DTV or ATV �
Press s to select Bandwidth , press v or w to select
7MHz , 8MHz or 7MHz and 8MHz ( - page 72)�
Then, press s to select Start Scan , and then press
� You must allow the TV to complete the search�
Auto Tuning
DTV Tune
ATV Tune
When the search is complete, the TV will
automatically select position one�
, to display the Time Zone menu, and then
, to display the Location menu ( - page
Home
, to display the TV Mounting menu, press
Stand
, to display the AutoView menu ( - page
No
to display the Auto Tuning startup screen�
Progress
3%
Waiting...
Channel: 10
Found
2