Advanced Network Setup - Toshiba 46WL700A Owner's Manual

Advanced Network Setup

Notes:
• When the DHCP function of the router connected
with this TV is On, you can set Auto Setup to On or
Off. (this should usually be set to On.)
• When the DHCP function of the router is Off,
set Auto Setup to Off, and set the IP Address
manually.
IP Address Setup
Auto Setup:
1
From the PREFERENCES menu, select Network
Setup and press
2
Press s or r to select Advanced Network Setup ,
and press �
Network Setup
Network Type
Wireless Setup
Advanced Network Setup
3
Press s or r to select IP Address Setup , and
press �
Advanced Network Setup
IP Address Setup
DNS Setup
MAC Address
4
Select Auto Setup , and then press v or w to select
On �
IP Address Setup
Auto Setup
IP Address
Subnet Mask
Default Gateway
Note:
Other items will be greyed out when Auto Setup is
set to On.
Manual Setup:
1
From the PREFERENCES menu, select Network
Setup and press
2
Press s or r to select Advanced Network Setup ,
and press �
3
Press s or r to select IP Address Setup , and
press �
4
Select Auto Setup , and then press v or w to select
Off �
5
Press s or r to select IP Address �
56
Connecting your TV
�
Wired
On
. . .
. . .
. . .
�
6
Press v or w to select the field you want to change,
and then use the number buttons to input the IP
address� To save the setting, press
Note:
IP address field numbers must be between 0
and 255. After each field number has been set,
press to store the entire address. If the entire
IP Address is invalid, a warning message will
appear after is pressed.
7
Press s or r to select Subnet Mask , and edit in the
same way as IP Address�
8
Press s or r to select Default Gateway , and edit
in same way as IP Address �
Note:
If you manually set the IP address, you must not use
the same IP address for any other device. The IP
address you use should be a private address.
DNS Setup
When the DHCP function of the router connected to this
TV is Off, set Auto Setup to Off, and manually set the
DNS address(es)� Your internet service provider should
have provided these to you�
Auto setup:
1
From the PREFERENCES menu, select Network
Setup and press
2
Press s or r to select Advanced Network Setup ,
and press �
3
Press s or r to select DNS Setup , and press
4
Select Auto Setup , and then press v or w to select
On �
Note:
Other items will be greyed out when Auto Setup is
set to On.
Manual setup:
1
From the PREFERENCES menu, select Network
Setup and press
2
Press s or r to select Advanced Network Setup ,
and press �
3
Press s or r to select DNS Setup , and press
4
Select Auto Setup , and then press v or w to select
Off �
5
Press s or r to select Primary DNS Address �
6
Press v or w to select the field you want to change,
and then use the number buttons to input the Primary
DNS Address� To save the setting, press
�
�
�
�
�
�