Table of Contents
Advertisement
Network Upgrade
TOSHIBA may offer upgrades for the TV's software in the future.
The TV's software is upgraded via the Network.
Before downloading software;
Configure your TV to connect to the Internet.
NOTE: While the upgrade is being performed, you will not be
able to watch the TV.
a
In the Software Upgrade menu, press B or b to
select Network Upgrade and press OK.
NOTE: If the network is not available, a warning
message will appear.
b
The TV software upgrade will start when download
succeeds.
Software Licences
The licences for the software used in this television are available
for viewing.
a
In the SETUP menu, press
Licences and press OK.
A screen will appear displaying all the licensing
information required for the televisions software.
B
b
or
to select Software
59
System Information and Reset TV
System Information
This feature can be used to check the version of software
currently installed. When in DTV mode, it includes additional
diagnostic information such as signal strength, signal quality,
centre frequency, modulation, etc.
a
In the SETUP menu, press
Information is highlighted.
b
Press OK to display the System Information.
System Information
2.1.26.0 Feb 19 2010 - 15:56:50 FW:13
WEAK
Ch25
c
For information about the signal quality of a particular
B
multiplex, press
or
d
Press OK for a screen showing detailed technical
information about the selected multiplex.
Reset TV
Selecting Reset TV will reset all TV settings, including saved
channels, to their original factory values.
a
In the SETUP menu, press
highlighted.
b
Press OK to select. A screen will appear warning that
all settings will be lost. Press OK to continue.
When the set powers back on, the Quick Setup
screen will appear. Press OK to advance the setup and
perform an auto tune. (See "Quick Setup" section on
page 13.)
CONTROLS AND FEATURES
B
b
or
until System
TOSHIBA
2010
AVERAGE
STRONG
Good
b
to select that multiplex.
b
until Reset TV is
Advertisement
Table of Contents
