Sound Adjustment - Toshiba 46WL700A Owner's Manual

White Balance - Copy to All Inputs
This feature copies White Balance on the current input to
all other inputs� Individual settings that are not allowed for
a specifi c input will not be copied.
1
From the Expert Picture Settings menu, press s
or r to select White Balance , and then press
2
Press s or r to select Copy to All Inputs , and
then press �
A confi rmation screen appears.
3
Select Yes , and then press
Resetting the Expert Picture Settings
This feature resets your Expert Picture Settings to the
factory settings�
1
From the Expert Picture Settings menu, press s
or r to select Reset and then press
2
A confi rmation screen appears. Select Yes , press
Viewing the Control Visualization
This feature displays the brightness histogram and control
curve for the current video display�
1
From the PICTURE menu, press s or r until
Control Visualization is selected, and then press
� The histogram window will appear�
Control Visualization
Number
Of
Pixels
Output
2
Press to return to the previous menu�
RETURN
Using Auto Format
When the TV receives a true HDMI signal picture and
Auto Format is On , the picture will automatically be
displayed in HDMI signal format, irrespective of the TV's
previous setting� When in Digital TV mode, the display
format will follow the broadcasted format�
Using the TV's features (General)
�
�
Distribution
Brightness
Control Curve
Input
1
From the PREFERENCES menu, press
until Display Settings is selected�
PREFERENCES
REGZA-LINK Setup
Network Setup
�
Media Renderer Setup
Photo Frame Setup
Teletext
Network Lock
Panel Lock
Display Settings
2
Press , and then press s or r to select Auto
Format �
3
Press v or w to select On or Off �

Sound adjustment

Setting the MTS (Multi-channel TV Sound)
�
- analogue -
Auto mode
The MTS Auto mode automatically recognizes stereo/
bilingual programmes depending on the broadcast signal�
1
Press , and then press v or w to display the
MENU
SOUND menu�
SOUND
MTS
Dual
Balance
Advanced Sound Settings
Dolby Volume
Dynamic Range Control
Audio Level Offset
Audio Description
2
Press s or r to select MTS , and then press v or w
to select Auto or Mono �
Mono mode
If you experience noise or poor reception of any stereo/
bilingual programme, set the MTS mode to Mono �
Noise will be reduced and reception may improve�
Note:
If you experience noise with a particular programme
whose channel reception is usually good, try setting
MTS mode to Auto, and then switch b to e
Mono (monaural).
or
Auto
Off
Auto
Off
Auto
Dual 1
0
Low
Off
27