Network Upgrade; Using The System Information; Local Time Settings; Performing A Software Upgrade - Toshiba 32SL800A Owner's Manual

2
Press v or w to choose the desired Parental Setup
option�
• None, Block all, Block G and above, Block
PG and above, Block M and above, Block
MA and above, Block AV and above, Block R
and above�
To view blocked programmes, enter the PIN�

Using the System Information

This feature can be used to check the version of software
currently installed� When in DTV mode, it includes
additional diagnostic information such as signal strength,
signal quality, centre frequency, modulation, etc�
1
From the System Setup menu, press s or r until
System Information is selected�
2
Press OK to display the System Information �
System Information
x.x.x.x Xxx xx 2011 - xx:xx:xx XX:xx
WEAK
Ch22
Ch25
Ch35
Ch46
3
For information about the signal quality of a particular
multiplex, press s or r to select that multiplex�
4
Press OK for a screen showing detailed technical
information about the selected multiplex�

Local Time Settings

• This function allows you to manually set the time zone.
Please note that if you manually change the time zone
setting, all existing entries under Programme Timers will
become invalid as they are still based on the old time
zone� It is recommended that you delete all entries under
Programme Timers before proceeding with the steps
described below�
1
From the DTV Settings menu, press s or r to
select Local Time Setting �
2
Press OK and press s or r to select Time Zone �
3
Press v or w to select the item you want to set�
( New South Wales , Northern Territory ,
Queensland , South Australia , Tasmania ,
Victoria , Western Australia , Australian Capital
Territory )
Local Time Setting
Time Zone
Local Time
Other Digital TV features and settings
TOSHIBA
2011
AVERAGE STRONG
Poor
Good
Good
Good
New South Wales
11:30
4
Press s to select Local Time and press v or w to
set as required�

Performing a Software Upgrade

Network Upgrade

TOSHIBA may offer upgrades for the TV's software in
the future�
The TV's software is upgraded via the Network�
Before downloading software;
Configure your TV to connect to the Internet.
Note:
While the upgrade is being performed, you will not
be able to watch the TV.
1
From the System Setup menu, press s or r to
select Software Upgrade and press OK �
2
Press s or r to select Network Upgrade and press
OK �
Note:
If the network is not available, a warning
message will appear.
3
The TV software upgrade will start when download
succeeds�

Viewing the Software Licences

The licences for the software used in this TV are available
for viewing on screen�
1
From the System Setup menu, press s or r until
Software Licences is selected�
2
Press OK �
A screen will appear displaying all of the licencing
information required for the TV's software�
39