Renderer Feature; Device Name Setup - Toshiba 46WL700A Owner's Manual

Button
RED Deletes 1 character to the left of the cursor�
GREEN Cycles through upper case, lower case, numbers,
and symbols, if available�
YELLOW Chooses an accented version of the current letter, if
applicable�
BLUE Saves changes and closes the Software Keyboard
window�
Closes the Software Keyboard window without
RETURN
saving changes�
Setting up the Media Renderer feature
Terminology:
DMS: DLNA CERTIFIED™ Server
DMR: DLNA CERTIFIED™ Renderer
DMC: DLNA CERTIFIED™ Controller
The TV can be configured as a DMR. When operating as
a DMR, the TV displays content provided by a DMS� The
selection of the media is done by the DMC - the TV does
not select the input� The TV can play photo, movie, or
audio files when operating as a DMR.
Installation
You can configure the DMR settings individually, or use
Installation mode to be prompted for each setting in order�
1
From the PREFERENCES menu, select Media
Renderer Setup and press
PREFERENCES
REGZA-LINK Setup
Network Setup
Media Renderer Setup
Photo Frame Setup
Teletext
Network Lock
Panel Lock
Display Settings
2
Press s or r to select Installation , and press
3
Press v or w to select On , and press
4
If you want to change the device name as a Renderer,
select the Device Name field and press
Software Keyboard window will appear�
5
Input the Device Name by using the Software
Keyboard� To save your setting, press the BLUE
button�
Note:
The Device Name can be up to 127 characters
long.
58
Connecting your TV
Description
�
Off
Auto
Off
�
� The
6
Select Done , and then press
7
If you want to change the password, press v or w to
select Yes , and then press
8
Change the Web Password by using the Software
Keyboard ( - page 57), and then press the BLUE
button�
Note:
The Web Password can be up to 15 characters
long.
9
Select Done , and then press
10
If you want to limit access from unexpected DMCs,
press v or w to select On , and then press
11
If you want to proceed with registration of DMCs,
press v or w to select Yes , and then press
12
Press s or r to select the item you want to accept,
and press
remove the check, press
13
Press w to select Done , and then press
14
The Maximum Volume Setup window appears�
Press v or w to adjust to the desired volume� Then,
press �
Media Renderer
1
From the PREFERENCES menu, select Media
Renderer Setup and press
2
Press s or r to select Media Renderer , and then
press v or w to select On or Off �

Device Name Setup

The TV's device name as a DMR can change� The device
name can be confirmed from the DMC.
1
From the PREFERENCES menu, select Media
Renderer Setup and press
2
Press s or r to select Device Name Setup , and
�
press �
3
Select the Device Name field and press
Software Keyboard window will appear�
4
Input the Device Name by using the Software
Keyboard ( - page 57)� To save your setting, press
the BLUE button�
Note:
The Device Name can be up to 127 characters
long.
5
Select Done , and then press
�
�
�
� A check will appear in the box� To
again�
�
�
�
�
�
�
� The