Table of Contents
Advertisement
q
Main Menu
Use the Jog to select from the following options, then press the
Enter button to begin.
Delete: Delete all data from the hard disk (with the possibility of restoring it).
Undelete: Restore data that has been deleted, but not yet overwritten.
Destroy: Erase all data from the hard disk permanently, without the possibility
of restoring it. Selecting this option brings up a confirmation dialog box.
q
Main Menu
Use this menu to set the Record Lock feature. This feature disables the front panel
record button. Setting Record Lock to ON will start the unit recording if it is not currently
in the Record mode.
q
Main Menu
The ADM feature prevents the unit from displaying or archiving any search results that are more than
thirty days old. This feature may be required by law in some jurisdictions. If required by local authorities,
the ADM feature must be turned On by selecting between 7 and 99 days. Typically this feature is
turned Off.
ADM Setting
99
3.10 Alarms
Use this menu to configure the alarm handling features of the unit.
Caution! StoreSafe's primary function is to furnish video
multiplexing and recording with a multiscreen display. Although
the unit has alarm handling and motion detection functions, these
are considered secondary features. This unit should not be the
only alarm device on site.
0150-0229D
Record
Disk Maintenance
Record
Record Lock
Record
ADM (Auto Delete Mode)
Days
Message
ADM will change. Are you sure?
Yes
39
Delete
UnDelete
Destroy
OFF
ON
Input Configuration
Alarm Latch
Enable / Disable
Alarm History
Link to a Macro
Buzzer Setup
Notification
Archive Alarms
Kalatel DVMRe StoreSafe
Advertisement
Table of Contents
