Setting The Alarms - GE Interlogix Kalatel VDR User Manual

Main Menu → Time/Date → Set Time
o
To set the Time:
1. With HH MM SS highlighted, press the Enter button. The highlighting
will move to the row of numbers.
2. Enter the time in Hours, Minutes, and Seconds. Use the to change
the values. Use the Arrow buttons to navigate among the three
fields.
3. Press the Enter button to confirm the selection.
4. To Save the changes and Exit the menu: Use the Arrow buttons
to select [OK], then press the Enter button.
5. To Exit the menu without making changes: Use the Arrow
buttons to select [CANCEL], then press the Enter button.
Main Menu → Time/Date → Set Date
o
To set the Date:
1. With MM DD YY DAY highlighted, press the Enter button. The
highlighting will move to the row of numbers.
2. Enter the date in Months, Days, and Years. Day of the Week
will update automatically. Use the Arrow buttons to change
the values. Use the Arrow buttons to navigate among the
three fields.
3. Press the Enter button to confirm the selection.
4. To Save the changes and Exit the menu: Use the Arrow
buttons to select [OK], then press the Enter button.
5. To Exit the menu without making changes: Use the Arrow
buttons to select [CANCEL], then press the Enter button.

1.10 Setting the Alarms

Main Menu → Alarms
o
Use this menu to specify:
•
Whether an alarm condition will be activated when the
unit detects a signal on the Alarm In connection.
•
Whether the internal buzzer is activated during an
alarm condition.
0150-0255B
--OR--
--OR--
1-7
Time Setup
HH MM SS
03 05 53
[CANCEL]
Date Setup
MM DD YY DAY
12 17 00 SUN
[CANCEL]
Alarms Menu
Hardwire Alarm :
Alarm Buzzer :
[CANCEL] [OK]
Kalatel VDR
[OK]
[OK]
Enable
Enable