Language Password; Passwords - GE Interlogix Digital Video Multiplexer Recorder User Manual

Ge digital video multiplexer recorder user manual

Hide thumbs

Table Of Contents

Table of Contents

Change Language

From the Factory Setting menu, press the Enter button. A

password box will appear. Enter the Language password. Select

OK, then press the Enter button.

A menu will appear displaying the available language selections.

Rotate the Jog to select the desired language.

Save changes and exit the menu: Press the Enter button.

Exit the menu without making changes: Press the Menu button.

3.19 Passwords

Use this feature to change the Installer, Operator or Ethernet passwords.

Changing the Installer or Operator Passwords

To change the password:

1. Highlight the password you wish to change, then press the

Enter button. A password box will appear.

2. Enter the new password using the Number buttons.

3. Highlight OK, then press the Enter button.

4. Re-enter the password.

5. Highlight OK, then press the Enter button. The user will be

prompted, indicating if the password was entered correctly

and changed.

The Ethernet Password

The Ethernet Password feature limits access to only those

users who access the unit using the password feature of

WaveReader versions 2.4 or later. When the unit is first setup,

the default is No Password Protection. Meaning, anyone

using WaveReader and accessing with an ethernet connection

can connect to the unit.

Activate The Ethernet Password

1. Enter the new password using the Number buttons.

2. Highlight OK, then press the Enter button.

3. Re-enter the password.

4. Highlight OK, then press the Enter button. The user will be prompted, indicating if the password was

entered correctly and changed.

Deactivate The Ethernet Password

To return the unit to No Ethernet Password Protection,

enter the Ethernet Access Reset Password in the

password box shown above.

0150-0229D

Ethernet Access Reset Password