Table of Contents
Advertisement
2.5 Recording
To begin recording, press the Record button. Recording will be indicated by the
LED located directly above the Record button. The unit always starts recording
at the end of previously recorded data. The unit will continue recording until the
record button is pressed again, unless Record Lock is ON.
StoreSafe also remembers its current record mode in the event of power loss. If the unit was recording
during a power loss, then when power is restored the unit will put itself back in that mode.
Monitor Displays During Recording
Multiscreen Live and Playback displays on Monitor A and Monitor B are not affected by recording
operations.
Playback Mode
Triplex Mode
0150-0229D
Monitor A
LIVE
Stop Mode
PLAY
BACK
LIVE
PLAY
BACK
20
Record Button
Monitor B
LIVE
LIVE
LIVE
Kalatel DVMRe StoreSafe
Advertisement
Table of Contents
Need help?
Do you have a question about the Digital Video Multiplexer Recorder and is the answer not in the manual?