Display Assembly - HP Pavilion 14 Maintenance And Service Manual

3. Remove the speakers (4).
Reverse this procedure to install the speakers.

Display assembly

NOTE:
The display assembly is spared at the subcomponent level only. For more display assembly
spare part information, see the individual removal subsections.
Before removing the display assembly, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the battery (see
a.
Optical drive (see
b.
Hard drive (see
c. WLAN module (see
d.
Keyboard (see
e. Top cover (see
f. System board (see
Battery on page 37), and then remove the following components:
Optical drive on page
Hard drive on page 40)
WLAN module on page
Keyboard on page 46)
Top cover on page 49)
System board on page
38)
42)
57)
Component replacement procedures
75