HP Pavilion 14 Maintenance And Service Manual page 61

Notebook pc
Table of Contents

Advertisement

2.
Remove the following screws:
(1) Three Phillips PM2.0×2.0 screws in the battery bay
(2) Two Phillips PM2.0×2.0 screws in the optical drive bay
(3) Two Phillips PM2.5×3.5 screws in the hard drive bay
(4) Two Phillips PM2.5×5.5 screws on the front edge of the computer
3.
Release the ZIF connector (1) to which the power button board ribbon cable is connected, and
then disconnect the power button board ribbon cable from the system board.
4.
Release the ZIF connector (2) to which the TouchPad button board ribbon cable is connected, and
then disconnect the TouchPad button board ribbon cable from the system board.
Component replacement procedures
51

Advertisement

Table of Contents
loading

Table of Contents