Xerox 7750DXF - Phaser Color Laser Printer Service Manual page 159

2.
Click Start, click Settings, then click Printers to verify that the printer is
installed.
Launching CentreWare DP
1. Click Start, click Programs, then click CentreWare DP.
2. Select the desired printer. If a communications error message appears, your
printer is not able to communicate with your workstation. Verify your printer's
settings, then return to this document.
3.
With the printer selected, click the Printer drop-down list, then select Advanced
Setup.
4.
Select one of the following connection methods:
Novell Directory Services
Bindery
5.
Verify that the information displayed is also contained on the "Configuration
Page". Verify these items:
a.
The queue name of the Phaser printer is set to service. If necessary, create a
new queue to test the printer.
b. The Primary Server lists the server name on the "Configuration Page"
Printing a Document
1.
Click the Tools drop-down list.
2. Select the Send File... menu item, then select the appropriate directory and file
for downloading. Verify that this is a valid file with no errors.
3. Click OK. The file is sent to the printer. If the document does not print, review
the Novell Menu settings on the "Configuration Page".
Verifying the Network Settings
1.
At the CentreWare DP main screen, click the Printer drop-down list, click
Properties, then click Connections.
2.
Click the Network Card tab. A new dialog box displays information about frame
type and connectors.
3.
Verify that the printer is enabled and the connector and frame type are correct. If
changes are made, reset the printer from the front panel.
4. Re-print a test page. If the test print does not print, go to
support.
General Troubleshooting
www.xerox.com/office/
4-31