Xerox 7750DXF - Phaser Color Laser Printer Service Manual page 186

Image Mis-Registered on Paper
The image area is not centered on the
page or the image is bleeding off of the
page. The printer displays no error code.
1. Run the "Configuration Page" or
"Startup Page" to verify the hard
drive, application, and driver
settings. From the front panel's
Information Pages
Configuration Page
Page.
2.
Is the correct weight paper loaded
in the tray?
3.
Ensure that the paper guides are set
to the correct position for the paper
loaded in the tray.
4.
Try printing from the other trays. If
the problem only occurs from one
tray, clean the rollers in that tray.
5.
Run the Calibrate Margins routine.
From the front panel's
Calibrate
select
6.
Verify that Tray 1/MPT or Tray 2 has not been inadvertently set to custom width
while standard sized paper is installed.
7.
Verify that the front Tray 1/MPT guide is in the correct position.
5-26
Menu, select
or Startup
Printer Setup
Margins.
Menu, select Calibration
Phaser 7750 Printer Service Manual
3041-54
Setup, then