Light Kit - Hunter M3544-01 Manual

Light Kit

Connect the plugs from the upper and
lower switch housings. Make sure to line
up the colored markings on
the connectors.
Switch
Housing
Screw
Partially install two of the switch housing
screws found in the bag. Align the
keyhole slots in the light kit housing
with the housing assembly screws. Make
sure all the wires from the fan and the light
kit are snug inside the center of the light
kit, not pinched in between the upper
switch housing and the light kit or hanging
out of the sides.
14
M3544-01 • 09/24/13 • © Hunter Fan Company
www.HunterFan.com
Turn the light kit clockwise until the
housing assembly screws are firmly
situated in the narrow end of the keyhole
slots. Install the remaining screw into the
housing. Tighten all three screws securely.
Make sure the lower switch housing is securely attached to
the upper switch housing. Failure to properly secure all three
assembly screws could result in the light fixture falling.
1.888.830.1326