Table of Contents
Advertisement
Downrod (continued)
Using the provided Allen
wrench, loosen the setscrew on
the adapter to install the pipe
and ball assembly.
Note: The adapter cover is not
used for low-profile mounting.
Insert the downrod through the
adapter cover. Hand tighten the
downrod (at least 4-5 full turns)
until it stops.
8"
M3544-01 • 09/24/13 • © Hunter Fan Company
3/8"
8"
The wires can be cut, but
leave at least 8" extending
from the top of the downrod.
7
www.HunterFan.com
1.888.830.1326
Use the Allen wrench to
securely retighten the setscrew.
3/8"
If the setscrew is not tightened
securely, the fan may fall.
Advertisement
Table of Contents
