Hunter M3544-01 Manual page 10

Wiring (continued)
www.HunterFan.com
1.888.830.1326
1.
1.
1.
1.
2.
2.
2.
2.
After removing the switch plate Using orange wire connectors, Insert the wall control into Install the cover plate using a
cover, remove all wiring from connect the two black wires the outlet box and secure the Phillips Head screwdriver to
the switch. (ungrounded) from the outlet box. two screws using a Phillips secure the two cover plate screws.
Also connect the two green or bare head screwdriver.
wires (grounding) from the outlet
box with the grounding wire from
the wall control.
Turn the splices upward and push them carefully back through the hanger bracket
into the outlet box. Spread the wires apart, with the grounded wires on one side of
the outlet box and the ungrounded wires on the other side of the outlet box.
10
M3544-01 • 09/24/13 • © Hunter Fan Company