Hunter M3544-01 Manual page 16

Operation, Maintenance, & Cleaning
Battery
Holder
Battery
Battery
Door
Before operating the wall control,
press the battery door to eject it.
Using a Phillips head screwdriver,
remove the battery holder. Install
the battery with the positive (+)
side facing downward. Secure
the battery by reinstalling the
battery holder. Finally, reinstall
the battery door into the wall
control. When necessary, replace
with CR2032 battery.
ON
Note: The remote must be paired
before the fan will operate.
Within 3 minutes of restoring
power to the fan, press both
the Fan Off button and the High
button for at least 4 seconds. Your
fan will turn on low to indicate
successful syncing. If it does not,
turn off power to your fan, wait
1 minute then try again. If using
the transmitter with multiple fans,
repeat this process for each fan.
M3544-01 • 09/24/13 • © Hunter Fan Company
Fan
Off
High
Speed
Medium
Speed
High
Fan Off
Low
Speed
The Fan Off button only turns the
fan off. To turn the fan on, press
one of the fan speed buttons.
They are located next to the Fan
Off button.
High
ooo
oo Medium
Low
o
16
www.HunterFan.com
Light
Quickly press the Light button to
turn the lights off and on. Hold
the Light button to raise and dim
the light level.
If you are installing multiple remote-controlled fans on the
same circuit breaker, you may need to perform a few extra steps
to prevent interference or faulty operation of your remote controls.
Go to www.HunterFan.com/FAQs and click
"How do I properly install multiple remote-controlled fans?" for
more information.
1.888.830.1326