Toshiba 431A Installation And Operation Manual page 23

2) The voltage of the input power source must be within the rated input voltage range. The
input frequency range must be within the rated input frequency range.
3) The ancillary cabinet
than the rated output of the UPS.
4) If using the ancillary cabinet
or with motors that require a long starting time, call Toshiba support for guidance in over
sizing the UPS for locked-rotor current.
5) DO NOT insert metal objects or combustible materials in the ventilation slots of the
ancillary cabinet.
6) DO NOT place, hang, or paste any objects on the exterior surfaces of the
7) DO NOT attempt to disassemble, modify, or repair the
sales representative for repair information.
8) Turn the power on only after installing ALL of the covers.
9) DO NOT remove any covers of the
10) If the ancillary cabinet
off immediately.
11) Additional warnings and notifications shall be posted at the equipment installation
location as deemed required by Qualified Personnel.
4300 Series Ancillary Cabinets Installation and Operation Manual
should not be used with a load that has a rated input that is greater
to provide power to motors that require high starting current
ancillary cabinet
should emit smoke or an unusual odor or sound, turn the power
ancillary
ancillary cabinet. Call your Toshiba
when power is on.
cabinet.
15