Table of Contents
Advertisement
Completion
When the kick plates are properly installed, the front panel will be nearly flush with the front (Figure 13-4). The side
kick plate will be inset about a quarter inch from the vertical side plane (Figure 13-5), and the back F/B kick plate will
extend out about a quarter inch beyond the vertical back plane of the UPS (Figure 13-6).
Figure 15-4
Figure 15-5
Figure 15-6
Back Kick Plate
Side Kick
Front Kick Plate
Plate
65
4300 Series Ancillary Cabinets Installation and Operation Manual
Advertisement
Table of Contents
