Power Button Board - HP ENVY m6 Sleekbook Maintenance And Service Manual

Power button board

Description
Power button board
Before removing the power button board, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the service cover (see
5. Remove the battery (see
6. Remove the fan (see
7. Remove the card reader board (see
8. Remove the system board (see
Remove the power button board and cable:
1. Remove the Phillips PM2.0×2.0 broadhead screw (1) and the Phillips PM2.5×3.5 screw (2) that
secures the right hinge to the computer.
2. Remove the power button board (3) from the computer.
NOTE:
52 Chapter 4 Removal and replacement procedures
Service cover on page
Battery on page
Fan on page
System board on page
The power button board cable is soldered onto the board.
30).
32).
45).
Card reader board on page
47).
Spare part number
725451-001
44).