Memory Modules - HP ENVY m6 Sleekbook Maintenance And Service Manual

Table of Contents

Advertisement

Memory modules

Description
2-GB memory module (PC3L, 12800, 1600-MHz)
4-GB memory module (PC3L, 12800, 1600-MHz)
8-GB memory module (PC3L, 12800, 1600-MHz)(Intel models only)
Before removing a memory module, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the service cover (see
5.
Disconnect the battery cable (see
Remove the memory module:
1.
Spread the retaining tabs (1) on each side of the memory module slot to release the memory
module. (The memory module tilts up.)
2.
Remove the memory module (2) by pulling the module away from the slot at an angle.
Reverse this procedure to install a memory module.
Service cover on page
Battery on page
32).
30).
Component replacement procedures
Spare part
number
691739-005
691740-005
693374-005
39

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents