Table of Contents
Advertisement
Display assembly, non-touchscreen
Description
Display assembly, FHD, non-touch
Display assembly, HD, non-touch
Before removing the display assembly, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the service cover (see
5.
Remove the battery (see
6.
Remove the fan (see
7.
Remove the card reader board (see
8.
Remove the system board (see
Remove the display assembly:
1.
Remove the 3 Phillips PM2.5×5.5 screws from the hinges (2 from the left, 1 from the right hinge)
(1).
2.
Remove the Phillips PM2.5×3.5 screw from right hinge (2).
3.
Rotate both hinges to the open position (3).
58
Chapter 4 Removal and replacement procedures
Service cover on page
Battery on page
32),
Fan on page
45).
Card reader board on page
System board on page
30).
44).
47).
Spare part number
727461-001
727462-001
Hide quick links:
Advertisement
Table of Contents
