Download Table of Contents Print this page

Samsung SIA-0100Q User Manual

Long-range ir sensor
Hide thumbs Also See for SIA-0100Q:


Quick Links

User Manual
Long-Range IR Sensor

Important Safety Instructions

Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings, Install in accordance with the manufacturer's instructions.
Do not install near any heat sources such as radiators, heat reaisters, stoves, or other apparatus (including amplifi ers)
that produce heat.
Do not defeat the safety purpose of the polarized or grounding-type plug, A polarized plug has two blades with one wider
than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong
are provided for your safety, If the provided plug does not fi t into your outlet, consult an electrician for replacement of the
obsolete outlet.
Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.
Only use attachments/ accessories specifi ed by the manufacturer.
Use only with the cart, stand, tripod, bracket, or table specifi ed by the manufacturer, or sold with
the apparatus. When a cart is used. Use caution when moving the cart/apparatus combination to
avoid injury from tip-over.
Unplug this apparatus during lighting storms or when unused for long periods of time.
Refer all servicing to qualifi ed service personnel. Servicing is required when the apparatus has been damaged in any way,
such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
Z6806119901A-SIA-0100Q,0200Q.ind1 1
Z6806119901A-SIA-0100Q,0200Q.ind1 1
English _1
2010-03-30 오전 12:18:23
2010-03-30 오전 12:18:23


Table of Contents

Summary of Contents for Samsung SIA-0100Q

  • Page 1: Important Safety Instructions

    English _1 Z6806119901A-SIA-0100Q,0200Q.ind1 1 Z6806119901A-SIA-0100Q,0200Q.ind1 1 2010-03-30 오전 12:18:23...
  • Page 2 Batteries(battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like. Disconnection Device Disconnect the main plug from the apparatus, if it’s defected. And please call a repair man in your location. English _2 Z6806119901A-SIA-0100Q,0200Q.ind2 2 Z6806119901A-SIA-0100Q,0200Q.ind2 2 2010-03-30 오전 12:18:30 2010-03-30 오전 12:18:30...
  • Page 3 Notice: If there’s any possibility to occur any damages for the goods and human caused by not following the instruction Please read this manual for the safety before using of goods and keep it in the safe place. English _3 Z6806119901A-SIA-0100Q,0200Q.ind3 3 Z6806119901A-SIA-0100Q,0200Q.ind3 3 2010-03-30 오전 12:18:30 2010-03-30 오전 12:18:30...
  • Page 4: Product Features

    Lens Level Fine-tuning Upper Lens Adjustment (Upper) (Up/Down) Blocking Film for Setting Terminal View Finder Control Panel Lower Lens Adjustment (Up/Down) Lens Level Fine-tuning Mirror Lens (Lower) (Lower) English _4 Z6806119901A-SIA-0100Q,0200Q.ind4 4 Z6806119901A-SIA-0100Q,0200Q.ind4 4 2010-03-30 오전 12:18:31 2010-03-30 오전 12:18:31...
  • Page 5: What's Included

    If the contact point of the linked sensor switches from N.C to N.O, the long-range IR sensor will stop emitting the infrared radiation, which plays an indirect notifi cation role to the receiver and lights up the “Re-transmit LED”. English _5 Z6806119901A-SIA-0100Q,0200Q.ind5 5 Z6806119901A-SIA-0100Q,0200Q.ind5 5 2010-03-30 오전 12:18:32...
  • Page 6: Installation

    Insert the U-shaped bracket and insert the sensor bracket. Insert the U-shaped bracket to the pole and use the screws (4x25) to fi x the inserted sensor bracket. English _6 Z6806119901A-SIA-0100Q,0200Q.ind6 6 Z6806119901A-SIA-0100Q,0200Q.ind6 6 2010-03-30 오전 12:18:33 2010-03-30 오전 12:18:33...
  • Page 7: Adjusting The Beam

    Ensure that you can see the other sensor with the naked eye. Adjust the position so that the sensor is located at the center. Up/Down Adjustable Bolt Left/Right Adjustable Dial Left/right Fine-Tuning Bolt English _7 Z6806119901A-SIA-0100Q,0200Q.ind7 7 Z6806119901A-SIA-0100Q,0200Q.ind7 7 2010-03-30 오전 12:18:34 2010-03-30 오전 12:18:34...
  • Page 8 (10V DC) Check the voltage status with the 5-level indicator panel. Measured Voltage Alignment 2.5V or higher Excellent 0.5V ~ 2.4V Good 0.5V or lower Poor, to be adjusted English _8 Z6806119901A-SIA-0100Q,0200Q.ind8 8 Z6806119901A-SIA-0100Q,0200Q.ind8 8 2010-03-30 오전 12:18:36 2010-03-30 오전 12:18:36...
  • Page 9 The beam will be eradiated at about 1.4° angle in width. See the table below for details. Distance (A) Width (B) Width (C) 100m 2.5m 2.7m 150m 3.7m 4.0m 200m 5.0m 5.2m English _9 Z6806119901A-SIA-0100Q,0200Q.ind9 9 Z6806119901A-SIA-0100Q,0200Q.ind9 9 2010-03-30 오전 12:18:37 2010-03-30 오전 12:18:37...
  • Page 10 Max Distance (meter) Wire Gauge SIA-0100Q SIA-0200Q 12V DC 24V DC 12V DC 24V DC AWG 22 AWG 20 1,700 1,500 AWG 18 2,600 2,200 AWG 14 5,370 4,570 English _10 Z6806119901A-SIA-0100Q,0200Q.ind10 10 Z6806119901A-SIA-0100Q,0200Q.ind10 10 2010-03-30 오전 12:18:37 2010-03-30 오전 12:18:37...
  • Page 11: Alarm Memory

    If an alarm occurs, the detector will blink for 55 minutes after 5 minutes of standby. This can inform the patrol-guard that the sensor has been activated when they arrive on site. Alarm occurrence 60 min (restart operation) Memory LED 5 min 5 min 55 min (blinking)  English _11 Z6806119901A-SIA-0100Q,0200Q.ind11 11 Z6806119901A-SIA-0100Q,0200Q.ind11 11 2010-03-30 오전 12:18:38 2010-03-30 오전 12:18:38...
  • Page 12: Troubleshooting

    If you want to install multiple sensors in different ways, use the channel setting function to avoid confusion between sensors. 1) 1-Level Multi-Connection <1 CH> <2 CH> <3 CH> <4 CH> English _12 Z6806119901A-SIA-0100Q,0200Q.ind12 12 Z6806119901A-SIA-0100Q,0200Q.ind12 12 2010-03-30 오전 12:18:39 2010-03-30 오전 12:18:39...
  • Page 13 “LOW” in less than the minimum range and set it to “HIGH” in the effective range. Model HIGH SIA-0100Q 60 m 60~100 m SIA-0200Q 120 m 120~200 m English _13 Z6806119901A-SIA-0100Q,0200Q.ind13 13 Z6806119901A-SIA-0100Q,0200Q.ind13 13 2010-03-30 오전 12:18:39 2010-03-30 오전 12:18:39...
  • Page 14: Specifications

    Setting by the sound Features Adjust the beam power (low, high) Programmed AGC Temperature -25˚C ~ 65˚C Work Environment External Material PC resin Weight 1,517g Dustproof/Waterproof Rating IP55 English _14 Z6806119901A-SIA-0100Q,0200Q.ind14 14 Z6806119901A-SIA-0100Q,0200Q.ind14 14 2010-03-30 오전 12:18:40 2010-03-30 오전 12:18:40...
  • Page 15 Appearance Sensor Unit: mm Hood English _15 Z6806119901A-SIA-0100Q,0200Q.ind15 15 Z6806119901A-SIA-0100Q,0200Q.ind15 15 2010-03-30 오전 12:18:40 2010-03-30 오전 12:18:40...
  • Page 16 Correct Disposal of This Product P/No. : Z6806119901A VAN 10. 03 Z6806119901A-SIA-0100Q,0200Q.ind16 16 Z6806119901A-SIA-0100Q,0200Q.ind16 16 2010-03-30 오전 12:18:41 2010-03-30 오전 12:18:41...

This manual is also suitable for:


Table of Contents