Samsung SmartThings STS-PRS-250 Quick Start Manual

If your device doesn't connect
If your device doesn't connect when you remove the pull-tab,
hold the "Connect" button for 5 seconds until the LED goes
off. Then selected "Connect New Device" in the SmartThings
app.
Connect Button
LED Light
Quick-Start
Guide
Arrival Sensor
Using the Arrival Sensor:
You can place the SmartThings Arrival Sensor in a child's
bag, in a car, or around a pet's collar and it will send you a
notification when people, pets, and cars arrive or leave your
home.
Meet your Arrival Sensor
The Arrival Sensor lets you stay connected to people, pets,
and cars by sending you a push notification when they arrive
and leave home.
Using the Arrival Sensor:
If you place the Arrival Sensor on a keychain, it can emit a
beeping noise to help you find where you left your keys in
the house.
How to connect an Arrival Sensor
Select "Connect New Device" in the free SmartThings
mobile app and then remove the "Remove to pair" tab found
in the Arrival Sensor.
Installation Tips
The Arrival Sensor works best if it's within 15 feet (4.5
meters) of the SmartThings Hub when you connect it.
Replacing the battery
USE CARE when replacing the battery to avoid
damaging the battery clip. See a detailed how-to
video at http://support.SmartThings.com.
Top
CR2032 Battery
Cover
Circuit Board
Bottom