Download Print this page

Samsung SmartThings GP-U999SJVLCAA Quick Start Manual

Water leak sensor
Hide thumbs

Advertisement

Quick Links

Welcome to your
Water Leak Sensor
Setup
1.
Make sure the Water Leak Sensor
is within 15 feet (4.5 meters) of your
SmartThings Hub SmartThings Wifi
(or compatible device with
SmartThings Hub functionality)
during setup.
2.
Use the SmartThings mobile app to
select the "Add device" card and
then select the "Water leak sensor"
category.
3.
Remove the tab on the Water Leak
Sensor marked "Remove When
Connecting" and follow the
on-screen instructions in the
SmartThings app to complete setup.

Advertisement

loading

  Summary of Contents for Samsung SmartThings GP-U999SJVLCAA

  • Page 1 Welcome to your Setup Water Leak Sensor Make sure the Water Leak Sensor Remove the tab on the Water Leak is within 15 feet (4.5 meters) of your Sensor marked “Remove When SmartThings Hub SmartThings Wifi Connecting” and follow the (or compatible device with on-screen instructions in the SmartThings Hub functionality)
  • Page 2 Placement Troubleshooting Connect button LED Light The Water Leak Sensor detects moisture Hold the “Connect” button for 5 using two metal leads on the top and two seconds, and release it when the LED on the bottom of the sensor. starts blinking red.

This manual is also suitable for:

11578091395