Download  Print this page

Samsung SIA-0100Q User Manual

Long-range ir sensor
Hide thumbs

Advertisement

User Manual
Long-Range IR Sensor
SIA-0100Q/0200Q

Important Safety Instructions

1.
Read these instructions.
2.
Keep these instructions.
3.
Heed all warnings.
4.
Follow all instructions.
5.
Do not use this apparatus near water.
6.
Clean only with dry cloth.
7.
Do not block any ventilation openings, Install in accordance with the manufacturer's instructions.
8.
Do not install near any heat sources such as radiators, heat reaisters, stoves, or other apparatus (including amplifi ers)
that produce heat.
9.
Do not defeat the safety purpose of the polarized or grounding-type plug, A polarized plug has two blades with one wider
than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong
are provided for your safety, If the provided plug does not fi t into your outlet, consult an electrician for replacement of the
obsolete outlet.
10.
Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.
11.
Only use attachments/ accessories specifi ed by the manufacturer.
12.
Use only with the cart, stand, tripod, bracket, or table specifi ed by the manufacturer, or sold with
the apparatus. When a cart is used. Use caution when moving the cart/apparatus combination to
avoid injury from tip-over.
13.
Unplug this apparatus during lighting storms or when unused for long periods of time.
14.
Refer all servicing to qualifi ed service personnel. Servicing is required when the apparatus has been damaged in any way,
such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
Z6806119901A-SIA-0100Q,0200Q.ind1 1
Z6806119901A-SIA-0100Q,0200Q.ind1 1
English _1
2010-06-09 오후 2:04:34
2010-06-09 오후 2:04:34

Advertisement

loading

  Also See for Samsung SIA-0100Q

  Summary of Contents for Samsung SIA-0100Q

  • Page 1: Important Safety Instructions

    English _1 Z6806119901A-SIA-0100Q,0200Q.ind1 1 Z6806119901A-SIA-0100Q,0200Q.ind1 1 2010-06-09 오후 2:04:34...
  • Page 2: Explanation Of Graphical Symbols

    Batteries(battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like. Disconnection Device Disconnect the main plug from the apparatus, if it’s defected. And please call a repair man in your location. English _2 Z6806119901A-SIA-0100Q,0200Q.ind2 2 Z6806119901A-SIA-0100Q,0200Q.ind2 2 2010-06-09 오후 2:04:41 2010-06-09 오후 2:04:41...
  • Page 3 Notice: If there’s any possibility to occur any damages for the goods and human caused by not following the instruction Please read this manual for the safety before using of goods and keep it in the safe place. English _3 Z6806119901A-SIA-0100Q,0200Q.ind3 3 Z6806119901A-SIA-0100Q,0200Q.ind3 3 2010-06-09 오후 2:04:42 2010-06-09 오후 2:04:42...
  • Page 4: Product Features

    Lens Level Fine-tuning Upper Lens Adjustment (Upper) (Up/Down) Blocking Film for Setting Terminal View Finder Control Panel Lower Lens Adjustment (Up/Down) Lens Level Fine-tuning Mirror Lens (Lower) (Lower) English _4 Z6806119901A-SIA-0100Q,0200Q.ind4 4 Z6806119901A-SIA-0100Q,0200Q.ind4 4 2010-06-09 오후 2:04:42 2010-06-09 오후 2:04:42...
  • Page 5: What's Included

    If the contact point of the linked sensor switches from N.C to N.O, the long-range IR sensor will stop emitting the infrared radiation, which plays an indirect notifi cation role to the receiver and lights up the “Re-transmit LED”. English _5 Z6806119901A-SIA-0100Q,0200Q.ind5 5 Z6806119901A-SIA-0100Q,0200Q.ind5 5 2010-06-09 오후 2:04:43...
  • Page 6: Installation

    Insert the U-shaped bracket and insert the sensor bracket. Insert the U-shaped bracket to the pole and use the screws (4x25) to fi x the inserted sensor bracket. English _6 Z6806119901A-SIA-0100Q,0200Q.ind6 6 Z6806119901A-SIA-0100Q,0200Q.ind6 6 2010-06-09 오후 2:04:44 2010-06-09 오후 2:04:44...
  • Page 7: Adjusting The Beam

    Ensure that you can see the other sensor with the naked eye. Adjust the position so that the sensor is located at the center. Up/Down Adjustable Bolt Left/Right Adjustable Dial Left/right Fine-Tuning Bolt English _7 Z6806119901A-SIA-0100Q,0200Q.ind7 7 Z6806119901A-SIA-0100Q,0200Q.ind7 7 2010-06-09 오후 2:04:45 2010-06-09 오후 2:04:45...
  • Page 8 (10V DC) Check the product status according to the voltage. Measured Voltage Alignment 2.5V or higher Excellent 0.5V ~ 2.4V Good 0.5V or lower Poor, to be adjusted English _8 Z6806119901A-SIA-0100Q,0200Q.ind8 8 Z6806119901A-SIA-0100Q,0200Q.ind8 8 2010-06-09 오후 2:04:46 2010-06-09 오후 2:04:46...
  • Page 9 The beam will be eradiated at about 1.4° angle in width. See the table below for details. Distance (A) Width (B) Width (C) 100m 2.5m 2.7m 150m 3.7m 4.0m 200m 5.0m 5.2m English _9 Z6806119901A-SIA-0100Q,0200Q.ind9 9 Z6806119901A-SIA-0100Q,0200Q.ind9 9 2010-06-09 오후 2:04:47 2010-06-09 오후 2:04:47...
  • Page 10 Max Distance (meter) Wire Gauge SIA-0100Q SIA-0200Q 12V DC 24V DC 12V DC 24V DC AWG 22 AWG 20 1,700 1,500 AWG 18 2,600 2,200 AWG 14 5,370 4,570 English _10 Z6806119901A-SIA-0100Q,0200Q.ind10 10 Z6806119901A-SIA-0100Q,0200Q.ind10 10 2010-06-09 오후 2:04:48 2010-06-09 오후 2:04:48...
  • Page 11: Alarm Memory

    If another alarm occurs while the alarm memory is functioning by the fi rst alarm, the alarm memory will consider the second one like it's the fi rst and extend the operation time duration accordingly. English _11 Z6806119901A-SIA-0100Q,0200Q.ind11 11 Z6806119901A-SIA-0100Q,0200Q.ind11 11 2010-06-09 오후 2:04:48...
  • Page 12: Troubleshooting

    If you want to install multiple sensors in different ways, use the channel setting function to avoid confusion between sensors. 1) 1-Level Multi-Connection <1 CH> <2 CH> <3 CH> <4 CH> English _12 Z6806119901A-SIA-0100Q,0200Q.ind12 12 Z6806119901A-SIA-0100Q,0200Q.ind12 12 2010-06-09 오후 2:04:49 2010-06-09 오후 2:04:49...
  • Page 13 “LOW” in less than the minimum range and set it to “HIGH” in the effective range. Model HIGH SIA-0100Q 60 m 60~100 m SIA-0200Q 120 m 120~200 m English _13 Z6806119901A-SIA-0100Q,0200Q.ind13 13 Z6806119901A-SIA-0100Q,0200Q.ind13 13 2010-06-09 오후 2:04:49 2010-06-09 오후 2:04:49...
  • Page 14: Specifications

    Setting by the sound Features Adjust the beam power (low, high) Programmed AGC Temperature -25˚C ~ 60˚C Work Environment External Material PC resin Weight 2,500g Dustproof/Waterproof Rating IP55 English _14 Z6806119901A-SIA-0100Q,0200Q.ind14 14 Z6806119901A-SIA-0100Q,0200Q.ind14 14 2010-06-09 오후 2:04:50 2010-06-09 오후 2:04:50...
  • Page 15 Appearance Sensor Unit: mm English _15 Z6806119901A-SIA-0100Q,0200Q.ind15 15 Z6806119901A-SIA-0100Q,0200Q.ind15 15 2010-06-09 오후 2:04:50 2010-06-09 오후 2:04:50...
  • Page 16: Correct Disposal Of This Product

    Business users should contact their supplier and check the terms and conditions of the purchase contract. This product and its electronic accessories should not be mixed with other commercial wastes for disposal. Z6806119901A-00 Z6806119901A-SIA-0100Q,0200Q.ind16 16 Z6806119901A-SIA-0100Q,0200Q.ind16 16 2010-06-09 오후 2:04:51...
  • Page 17 Z6806119901A-SIA-0100Q,0200Q.ind1 1 Z6806119901A-SIA-0100Q,0200Q.ind1 1 2010-06-09 오후 2:04:52 2010-06-09 오후 2:04:52...
  • Page 18 • • • • • • • • • Z6806119901A-SIA-0100Q,0200Q.ind2 2 Z6806119901A-SIA-0100Q,0200Q.ind2 2 2010-06-09 오후 2:04:52 2010-06-09 오후 2:04:52...
  • Page 19 • Z6806119901A-SIA-0100Q,0200Q.ind3 3 Z6806119901A-SIA-0100Q,0200Q.ind3 3 2010-06-09 오후 2:04:53 2010-06-09 오후 2:04:53...
  • Page 20 • • •  Z6806119901A-SIA-0100Q,0200Q.ind4 4 Z6806119901A-SIA-0100Q,0200Q.ind4 4 2010-06-09 오후 2:04:54 2010-06-09 오후 2:04:54...
  • Page 21 Z6806119901A-SIA-0100Q,0200Q.ind5 5 Z6806119901A-SIA-0100Q,0200Q.ind5 5 2010-06-09 오후 2:04:55 2010-06-09 오후 2:04:55...
  • Page 22 Z6806119901A-SIA-0100Q,0200Q.ind6 6 Z6806119901A-SIA-0100Q,0200Q.ind6 6 2010-06-09 오후 2:04:56 2010-06-09 오후 2:04:56...
  • Page 23 Z6806119901A-SIA-0100Q,0200Q.ind7 7 Z6806119901A-SIA-0100Q,0200Q.ind7 7 2010-06-09 오후 2:04:57 2010-06-09 오후 2:04:57...
  • Page 24 Z6806119901A-SIA-0100Q,0200Q.ind8 8 Z6806119901A-SIA-0100Q,0200Q.ind8 8 2010-06-09 오후 2:04:58 2010-06-09 오후 2:04:58...
  • Page 25 • • • • •  Z6806119901A-SIA-0100Q,0200Q.ind9 9 Z6806119901A-SIA-0100Q,0200Q.ind9 9 2010-06-09 오후 2:04:59 2010-06-09 오후 2:04:59...
  • Page 26 Z6806119901A-SIA-0100Q,0200Q.ind10 10 Z6806119901A-SIA-0100Q,0200Q.ind10 10 2010-06-09 오후 2:04:59 2010-06-09 오후 2:04:59...
  • Page 27 Z6806119901A-SIA-0100Q,0200Q.ind11 11 Z6806119901A-SIA-0100Q,0200Q.ind11 11 2010-06-09 오후 2:05:00 2010-06-09 오후 2:05:00...
  • Page 28 Z6806119901A-SIA-0100Q,0200Q.ind12 12 Z6806119901A-SIA-0100Q,0200Q.ind12 12 2010-06-09 오후 2:05:01 2010-06-09 오후 2:05:01...
  • Page 29 Z6806119901A-SIA-0100Q,0200Q.ind13 13 Z6806119901A-SIA-0100Q,0200Q.ind13 13 2010-06-09 오후 2:05:01 2010-06-09 오후 2:05:01...
  • Page 30 Z6806119901A-00 Z6806119901A-SIA-0100Q,0200Q.ind14 14 Z6806119901A-SIA-0100Q,0200Q.ind14 14 2010-06-09 오후 2:05:01 2010-06-09 오후 2:05:01...
  • Page 31: Manuel D'utilisation

    à la pluie et à l’ humidité, il ne fonctionne pas normalement ou est tombé par terre. Français _1 Z6806119901A-SIA-0100Q,0200Q.ind1 1 Z6806119901A-SIA-0100Q,0200Q.ind1 1 2010-06-09 오후 2:05:02 2010-06-09 오후 2:05:02...
  • Page 32: Caractéristiques Du Produit

    Tableau de View Finder commande Réglage de l’objectif inférieur (Haut/Bas) Réglage affi né du niveau Objectif du miroir de l’objectif (Inférieur) (inférieur) Français _2 Z6806119901A-SIA-0100Q,0200Q.ind2 2 Z6806119901A-SIA-0100Q,0200Q.ind2 2 2010-06-09 오후 2:05:02 2010-06-09 오후 2:05:02...
  • Page 33 Si le point de contact du capteur relié bascule de l’état N.C vers N.O, le capteur infrarouge à longue portée arrêtera d'émettre la radiation infrarouge, entraînant une notifi cation indirecte vers le récepteur, et de ce fait, l’illumination de la « DEL de retransmission ». Français _3 Z6806119901A-SIA-0100Q,0200Q.ind3 3 Z6806119901A-SIA-0100Q,0200Q.ind3 3 2010-06-09 오후 2:05:03 2010-06-09 오후 2:05:03...
  • Page 34 Insérez le support en forme de U, puis insérez le support du capteur. Insérez le support en forme de U sur la perche et fi xez le support du capteur inséré à l’aide de vis (4x25). Français _4 Z6806119901A-SIA-0100Q,0200Q.ind4 4 Z6806119901A-SIA-0100Q,0200Q.ind4 4 2010-06-09 오후 2:05:04 2010-06-09 오후 2:05:04...
  • Page 35 Assurez-vous que vous pouvez voir le deuxième capteur à l’œil nu. Réglez la position du capteur au centre. Bouton de réglage haut/bas Molette réglable gauche/droite Boulon de réglage affi né gauche/droite Français _5 Z6806119901A-SIA-0100Q,0200Q.ind5 5 Z6806119901A-SIA-0100Q,0200Q.ind5 5 2010-06-09 오후 2:05:05 2010-06-09 오후 2:05:05...
  • Page 36 Vérifi ez l’état du produit au niveau de la tension. Tension mesurée Alignement 2,5 V ou supérieur Excellent 0,5 V ~ 2,4 V Good 0,5 V ou inférieur Poor, doit être réajusté Français _6 Z6806119901A-SIA-0100Q,0200Q.ind6 6 Z6806119901A-SIA-0100Q,0200Q.ind6 6 2010-06-09 오후 2:05:06 2010-06-09 오후 2:05:06...
  • Page 37 Le faisceau sera émis avec un angle d'environ 1,4. Consultez le tableau ci-dessous relatif au type de radiation. Distance (A) Largeur (B) Largeur (C) 100m 2.5m 2.7m 150m 3.7m 4.0m 200m 5.0m 5.2m Français _7 Z6806119901A-SIA-0100Q,0200Q.ind7 7 Z6806119901A-SIA-0100Q,0200Q.ind7 7 2010-06-09 오후 2:05:07 2010-06-09 오후 2:05:07...
  • Page 38 Jauge pour fi l SIA-0100Q SIA-0200Q 12V DC 24V DC 12V DC 24V DC AWG 22 AWG 20 1,700 1,500 AWG 18 2,600 2,200 AWG 14 5,370 4,570 Français _8 Z6806119901A-SIA-0100Q,0200Q.ind8 8 Z6806119901A-SIA-0100Q,0200Q.ind8 8 2010-06-09 오후 2:05:08 2010-06-09 오후 2:05:08...
  • Page 39 Si une nouvelle alarme se produit alors que la mémoire de l'alarme fonctionne encore en relation avec l’alarme précédente, la deuxième alarme sera considérée par la mémoire de l’alarme comme une continuation de la première et sa durée de fonctionnement sera prolongée en conséquence. Français _9 Z6806119901A-SIA-0100Q,0200Q.ind9 9 Z6806119901A-SIA-0100Q,0200Q.ind9 9 2010-06-09 오후 2:05:09 2010-06-09 오후 2:05:09...
  • Page 40: Dépannage

    Si vous souhaitez installer plusieurs capteurs en différents emplacements, utilisez la fonction de réglage de canal pour éviter la confusion entre les capteurs. 1) Connexions multiples de niveau 1 <1 CA> <2 CA> <3 CA> <4 CA> Français _10 Z6806119901A-SIA-0100Q,0200Q.ind10 10 Z6806119901A-SIA-0100Q,0200Q.ind10 10 2010-06-09 오후 2:05:09 2010-06-09 오후 2:05:09...
  • Page 41 « HAUTE » pour les valeurs comprises dans la plage effective. Modèle BASSE HAUTE SIA-0100Q 60 m 60~100 m SIA-0200Q 120 m 120~200 m Français _11 Z6806119901A-SIA-0100Q,0200Q.ind11 11 Z6806119901A-SIA-0100Q,0200Q.ind11 11 2010-06-09 오후 2:05:10 2010-06-09 오후 2:05:10...
  • Page 42: Caractéristiques Techniques

    Ajustez la puissance du faisceau (faible, élevé) AGC programmé Température -25˚C ~ 60˚C Environnement du travail Externe Matériau Résine de plastique polycarbonate Poids 2,500g Indice d’étanchéité aux poussières / IP55 à l’eau Français _12 Z6806119901A-SIA-0100Q,0200Q.ind12 12 Z6806119901A-SIA-0100Q,0200Q.ind12 12 2010-06-09 오후 2:05:10 2010-06-09 오후 2:05:10...
  • Page 43 Apparence Capteur Unité: mm Français _13 Z6806119901A-SIA-0100Q,0200Q.ind13 13 Z6806119901A-SIA-0100Q,0200Q.ind13 13 2010-06-09 오후 2:05:11 2010-06-09 오후 2:05:11...
  • Page 44 Les entreprises et professionnels sont invités à contacter leurs fournisseurs et à consulter les conditions de leur contrat de vente. Ce produit et ses accessoires ne peuvent être jetés avec les autres déchets professionnels et commerciaux. Z6806119901A-00 Z6806119901A-SIA-0100Q,0200Q.ind14 14 Z6806119901A-SIA-0100Q,0200Q.ind14 14 2010-06-09 오후 2:05:11 2010-06-09 오후 2:05:11...
  • Page 45: Wichtige Sicherheitshinweise

    Netzkabel oder Stecker, verschüttete Flüssigkeiten oder Gegenstände, die in das Gerät gefallen sind, das Gerät Regen oder Feuchtigkeit ausgesetzt wurde, nicht normal funktioniert oder fallen gelassen wurde. Deutsch _1 Z6806119901A-SIA-0100Q,0200Q.ind1 1 Z6806119901A-SIA-0100Q,0200Q.ind1 1 2010-06-09 오후 2:05:12 2010-06-09 오후 2:05:12...
  • Page 46 Spiegelobjektiv (oben) Sucher Objektiv Feineinstellung Einstellung des oberen (oben) Objektivs (hoch/runter) Blockierfi lm für die Anschlussklemme Einstellung Sucher Bedienfeld Einstellung des unteren Objektivs (hoch/runter) Objektiv Feineinstellung Spiegelobjektiv (unten) (unten) Deutsch _2 Z6806119901A-SIA-0100Q,0200Q.ind2 2 Z6806119901A-SIA-0100Q,0200Q.ind2 2 2010-06-09 오후 2:05:12 2010-06-09 오후 2:05:12...
  • Page 47 Wenn der Kontakt des angeschlossenen Sensors von N.C auf N.O umschaltet, unterbricht der der Fern IR- Sensor die Aussendung des Infrarotstrahls, der die Rolle einer indirekten Benachrichtigung des Empfängers spielt, und die “Re-transmit LED” leuchtet auf. Deutsch _3 Z6806119901A-SIA-0100Q,0200Q.ind3 3 Z6806119901A-SIA-0100Q,0200Q.ind3 3 2010-06-09 오후 2:05:13 2010-06-09 오후 2:05:13...
  • Page 48: Montage

    --förmigen Halter ist mit jeder Polarität Φ38~Φ43 funktionsfähig. Mastdurchmesser 38mm ~ 43mm Die U-förmige Halterung und die Sensorhalterung einführen. Die U-förmige Halterung am Mast befestigen und mit Hilfe der Schrauben (4x25) die Sensorhalterung befestigen. Deutsch _4 Z6806119901A-SIA-0100Q,0200Q.ind4 4 Z6806119901A-SIA-0100Q,0200Q.ind4 4 2010-06-09 오후 2:05:14 2010-06-09 오후 2:05:14...
  • Page 49 Sicherstellen, dass der zweite Sensor mit bloßem Auge erkennbar ist. Die Position so einstellen, dass sich der Sensor in der Mitte befi ndet. Oben/Unten Einstellschraube Links/Rechts Einstellskala Links/Rechts Feineinstellschraube Deutsch _5 Z6806119901A-SIA-0100Q,0200Q.ind5 5 Z6806119901A-SIA-0100Q,0200Q.ind5 5 2010-06-09 오후 2:05:15 2010-06-09 오후 2:05:15...
  • Page 50 Voltmeter (10V DC) Überprüfen Sie den Produktstatus entsprechend der elektrischen Spannung. Gemessene Spannung Ausrichtung 2,5V oder mehr Excellent 0,5V - 2,4V Good 0,5V oder weniger Poor, Einstellung erforderlich Deutsch _6 Z6806119901A-SIA-0100Q,0200Q.ind6 6 Z6806119901A-SIA-0100Q,0200Q.ind6 6 2010-06-09 오후 2:05:16 2010-06-09 오후 2:05:16...
  • Page 51 Der Lichtstrahl wird unter einem Winkel von ca. 1,4° ausgestrahlt. Nähere Informationen fi nden Sie in der folgenden Tabelle. Entfernung (A) Breite (B) Breite (C) 100m 2.5m 2.7m 150m 3.7m 4.0m 200m 5.0m 5.2m Deutsch _7 Z6806119901A-SIA-0100Q,0200Q.ind7 7 Z6806119901A-SIA-0100Q,0200Q.ind7 7 2010-06-09 오후 2:05:17 2010-06-09 오후 2:05:17...
  • Page 52 Max. Entfernung (Meter) Drahtstärke SIA-0100Q SIA-0200Q 12V DC 24V DC 12V DC 24V DC AWG 22 AWG 20 1,700 1,500 AWG 18 2,600 2,200 AWG 14 5,370 4,570 Deutsch _8 Z6806119901A-SIA-0100Q,0200Q.ind8 8 Z6806119901A-SIA-0100Q,0200Q.ind8 8 2010-06-09 오후 2:05:18 2010-06-09 오후 2:05:18...
  • Page 53 Wenn ein weiterer Alarm eintritt, während der Alarmspeicher noch durch den ersten Alarm in Funktion ist, behandelt der Alarmspeicher den zweiten Alarm so, als wäre er der erste und verlängert die Alarmdauer entsprechend. Deutsch _9 Z6806119901A-SIA-0100Q,0200Q.ind9 9 Z6806119901A-SIA-0100Q,0200Q.ind9 9 2010-06-09 오후 2:05:19...
  • Page 54: Fehlerbehebung

    Wenn die verschiedenen Sensoren auf unterschiedliche Art eingestellt werden sollen, muss die Kanaleinstellfunktion verwendet werden, um Störungen zwischen den Sensoren zu vermeiden. 1) 1-Level Mehrfachverbindung <KAN 1> <KAN 2> <KAN 3> <KAN 4> Deutsch _10 Z6806119901A-SIA-0100Q,0200Q.ind10 10 Z6806119901A-SIA-0100Q,0200Q.ind10 10 2010-06-09 오후 2:05:19 2010-06-09 오후 2:05:19...
  • Page 55 Refl ektion zu vermeiden, ist der Bereich bei weniger als der Minimumbereich auf “LOW” und im effektiven Bereich auf “HIGH” einzustellen. Modell HIGH SIA-0100Q 60 m 60~100 m SIA-0200Q 120 m 120~200 m Deutsch _11 Z6806119901A-SIA-0100Q,0200Q.ind11 11 Z6806119901A-SIA-0100Q,0200Q.ind11 11 2010-06-09 오후 2:05:19 2010-06-09 오후 2:05:19...
  • Page 56: Technische Daten

    Einstellung des Lichtstrahlwinkels Links/Rechts: ±90°, Oben/Unten: ±10° Einstellen durch Tonsignal Funktionen Einstellung der Lichtstrahlstärke (schwach, hoch) Programmierte AGC. Temperaturbereich -25˚C ~ 60˚C Betriebsumgebung Extern Material PC-Harz Gewicht 2,500g Staub/Wasserdichtigkeit IP55 Deutsch _12 Z6806119901A-SIA-0100Q,0200Q.ind12 12 Z6806119901A-SIA-0100Q,0200Q.ind12 12 2010-06-09 오후 2:05:20 2010-06-09 오후 2:05:20...
  • Page 57 Abmessungen Sensor Einheit: mm Deutsch _13 Z6806119901A-SIA-0100Q,0200Q.ind13 13 Z6806119901A-SIA-0100Q,0200Q.ind13 13 2010-06-09 오후 2:05:20 2010-06-09 오후 2:05:20...
  • Page 58: Korrekte Entsorgung Von Altgeräten

    Entsorgung abgeben können. Gewerbliche Nutzer wenden sich an ihren Lieferanten und gehen nach den Bedingungen des Verkaufsvertrags vor. Dieses Produkt und elektronische Zubehörteile dürfen nicht zusammen mit anderem Gewerbemüll entsorgt werden. Z6806119901A-00 Z6806119901A-SIA-0100Q,0200Q.ind14 14 Z6806119901A-SIA-0100Q,0200Q.ind14 14 2010-06-09 오후 2:05:21 2010-06-09 오후 2:05:21...
  • Page 59: Manual Del Usuario

    él, el aparato ha sido expuesto a la lluvia o a humedad, no funciona correctamente o se ha caído al suelo. Español _1 Z6806119901A-SIA-0100Q,0200Q.ind1 1 Z6806119901A-SIA-0100Q,0200Q.ind1 1 2010-06-09 오후 2:05:21...
  • Page 60: Características Del Producto

    Película de bloqueo para Terminal ajuste Buscador de vistas Panel de control Ajuste de lente inferior (Arriba/Abajo) Ajuste fi no de nivel de Lente del espejo (Inferior) lente (Inferior) Español _2 Z6806119901A-SIA-0100Q,0200Q.ind2 2 Z6806119901A-SIA-0100Q,0200Q.ind2 2 2010-06-09 오후 2:05:22 2010-06-09 오후 2:05:22...
  • Page 61 Si el punto de contacto del sensor enlazado cambia de N.C a N.A, el sensor de IR de largo alcance dejará de emitir la radiación de infrarrojos, que reproduce la función de notifi cación indirecta al receptor y se ilumina “Re-transmit LED”. Español _3 Z6806119901A-SIA-0100Q,0200Q.ind3 3 Z6806119901A-SIA-0100Q,0200Q.ind3 3 2010-06-09 오후 2:05:23...
  • Page 62: Instalación

    Inserte la abrazadera en forma de e inserte la abrazadera del sensor. Inserte la abrazadera en forma de U en el poste y utilice los tornillos (4x25) para fi jar la abrazadera del sensor insertada. Español _4 Z6806119901A-SIA-0100Q,0200Q.ind4 4 Z6806119901A-SIA-0100Q,0200Q.ind4 4 2010-06-09 오후 2:05:24 2010-06-09 오후 2:05:24...
  • Page 63 Asegúrese de que puede ver el otro sensor con normalidad. Ajuste la posición de forma que el sensor se encuentre en el centro. Perno ajustable Arriba/abajo Mando ajustable izquierda/ Perno de ajuste fi no izquierda/derecha Español _5 Z6806119901A-SIA-0100Q,0200Q.ind5 5 Z6806119901A-SIA-0100Q,0200Q.ind5 5 2010-06-09 오후 2:05:25 2010-06-09 오후 2:05:25...
  • Page 64 (10V CC) Compruebe el estado del producto de acuerdo con la tensión. Tensión medida Alineación 2,5V o más Excellent 0,5V ~ 2,4V Good 0,5V o menos Poor, debe ajustarse Español _6 Z6806119901A-SIA-0100Q,0200Q.ind6 6 Z6806119901A-SIA-0100Q,0200Q.ind6 6 2010-06-09 오후 2:05:26 2010-06-09 오후 2:05:26...
  • Page 65 El haz se irradiará en un ángulo aproximado de 1,4°. Consulte la tabla que se incluye a continuación para el tipo de irradiación. Distancia (A) Anchura (B) Anchura (C) 100m 2.5m 2.7m 150m 3.7m 4.0m 200m 5.0m 5.2m Español _7 Z6806119901A-SIA-0100Q,0200Q.ind7 7 Z6806119901A-SIA-0100Q,0200Q.ind7 7 2010-06-09 오후 2:05:26 2010-06-09 오후 2:05:26...
  • Page 66 Distancia máx. (metros) Calibrador de cable SIA-0100Q SIA-0200Q 12V DC 24V DC 12V DC 24V DC AWG 22 AWG 20 1,700 1,500 AWG 18 2,600 2,200 AWG 14 5,370 4,570 Español _8 Z6806119901A-SIA-0100Q,0200Q.ind8 8 Z6806119901A-SIA-0100Q,0200Q.ind8 8 2010-06-09 오후 2:05:27 2010-06-09 오후 2:05:27...
  • Page 67: Memoria De Alarma

    Si se produce otra alarma mientras funciona la memoria de alarma mediante la primera alarma, la memoria de alarma considerará la segunda como la primera y ampliará el tiempo de funcionamiento el mismo tiempo. Español _9 Z6806119901A-SIA-0100Q,0200Q.ind9 9 Z6806119901A-SIA-0100Q,0200Q.ind9 9 2010-06-09 오후 2:05:28...
  • Page 68: Solución De Problemas

    Si desea instalar varios sensores en vías diferentes, utilice la función de ajuste de canales para evitar la confusión entre sensores. 1) Multiconexión de nivel 1 <1 Can> <2 Can> <3 Can> <4 Can> Español _10 Z6806119901A-SIA-0100Q,0200Q.ind10 10 Z6806119901A-SIA-0100Q,0200Q.ind10 10 2010-06-09 오후 2:05:29 2010-06-09 오후 2:05:29...
  • Page 69 “LOW” por debajo del rango mínimo y defínalo en “HIGH” en el rango efectivo. Modelo HIGH SIA-0100Q 60 m 60~100 m SIA-0200Q 120 m 120~200 m Español _11 Z6806119901A-SIA-0100Q,0200Q.ind11 11 Z6806119901A-SIA-0100Q,0200Q.ind11 11 2010-06-09 오후 2:05:29 2010-06-09 오후 2:05:29...
  • Page 70: Especificaciones

    Ajuste de potencia de haz (bajo, alto) AGC programado Temperatura -25˚C ~ 60˚C Entorno de trabajo Externo Material Resina de PVC Peso 2,500g Califi cación antipolvo/ IP55 impermeabilidad Español _12 Z6806119901A-SIA-0100Q,0200Q.ind12 12 Z6806119901A-SIA-0100Q,0200Q.ind12 12 2010-06-09 오후 2:05:30 2010-06-09 오후 2:05:30...
  • Page 71 Aspecto Sensor Unidad: mm Español _13 Z6806119901A-SIA-0100Q,0200Q.ind13 13 Z6806119901A-SIA-0100Q,0200Q.ind13 13 2010-06-09 오후 2:05:30 2010-06-09 오후 2:05:30...
  • Page 72: Eliminación Correcta De Este Producto

    Los usuarios comerciales pueden contactar con su proveedor y consultar las condiciones del contrato de compra. Este producto y sus accesorios electrónicos no deben eliminarse junto a otros residuos comerciales. Z6806119901A-00 Z6806119901A-SIA-0100Q,0200Q.ind14 14 Z6806119901A-SIA-0100Q,0200Q.ind14 14 2010-06-09 오후 2:05:31 2010-06-09 오후 2:05:31...
  • Page 73: Manuale Utente

    è stato versato qualche liquido nell’apparecchio o vi sono caduti degli oggetti o se è stato esposto alla pioggia o all’umidità, se non funziona normalmente o se è caduto. Italiano _1 Z6806119901A-SIA-0100Q,0200Q.ind1 1 Z6806119901A-SIA-0100Q,0200Q.ind1 1 2010-06-09 오후 2:05:31...
  • Page 74: Caratteristiche Del Prodotto

    (su/giù) (superiore) Pellicola di attenuazione Terminale per la regolazione Mirino Pannello di controllo Regolazione obbiettivo inferiore (su/giù) Regolazione fi ne del livello Obbiettivo (inferiore) dell'obbiettivo (inferiore) Italiano _2 Z6806119901A-SIA-0100Q,0200Q.ind2 2 Z6806119901A-SIA-0100Q,0200Q.ind2 2 2010-06-09 오후 2:05:31 2010-06-09 오후 2:05:31...
  • Page 75: Accessori Forniti

    Se il punto di contatto del sensore collegato passa da N.C a N.O, il sensore IR a lungo raggio interrompe l'emissione della luce a infrarossi, che svolge una funzione di segnalazione indiretta al ricevitore e provoca l'accensione del "LED di ritrasmissione”. Italiano _3 Z6806119901A-SIA-0100Q,0200Q.ind3 3 Z6806119901A-SIA-0100Q,0200Q.ind3 3 2010-06-09 오후 2:05:32...
  • Page 76: Installazione

    Inserire la staffa a U e la staffa del sensore. Inserire la staffa a U sul palo e utilizzare le viti (4x25) per fi ssare la staffa del sensore inserita. Italiano _4 Z6806119901A-SIA-0100Q,0200Q.ind4 4 Z6806119901A-SIA-0100Q,0200Q.ind4 4 2010-06-09 오후 2:05:33 2010-06-09 오후 2:05:33...
  • Page 77: Montaggio A Parete

    Regolare la posizione in modo che il sensore si trovi al centro. Vite di regolazione su/giù Quadrante di regolazione sinistro/destro Vite di regolazione fi ne sinistra/destra Italiano _5 Z6806119901A-SIA-0100Q,0200Q.ind5 5 Z6806119901A-SIA-0100Q,0200Q.ind5 5 2010-06-09 오후 2:05:34 2010-06-09 오후 2:05:34...
  • Page 78 Verifi care lo stato del prodotto in relazione alla tensione. Tensione misurata Allineamento 2,5 V o superiore Excellent 0,5 V ~ 2,4 V Good 0,5 V o inferiore Poor, da regolare Italiano _6 Z6806119901A-SIA-0100Q,0200Q.ind6 6 Z6806119901A-SIA-0100Q,0200Q.ind6 6 2010-06-09 오후 2:05:35 2010-06-09 오후 2:05:35...
  • Page 79 Il fascio viene emesso con un angolo di circa 1,4°. Per il tipo di emissione del raggio, vedere la tabella in basso. Distanza (A) Ampiezza (B) Ampiezza (C) 100m 2.5m 2.7m 150m 3.7m 4.0m 200m 5.0m 5.2m Italiano _7 Z6806119901A-SIA-0100Q,0200Q.ind7 7 Z6806119901A-SIA-0100Q,0200Q.ind7 7 2010-06-09 오후 2:05:36 2010-06-09 오후 2:05:36...
  • Page 80 Distanza max (metri) Diametro dei cavi SIA-0100Q SIA-0200Q 12V DC 24V DC 12V DC 24V DC AWG 22 AWG 20 1,700 1,500 AWG 18 2,600 2,200 AWG 14 5,370 4,570 Italiano _8 Z6806119901A-SIA-0100Q,0200Q.ind8 8 Z6806119901A-SIA-0100Q,0200Q.ind8 8 2010-06-09 오후 2:05:37 2010-06-09 오후 2:05:37...
  • Page 81 Se si verifi ca un allarme successivo mentre è attiva la memoria allarme intervenuta a seguito del primo allarme, la memoria considera il secondo allarme come il primo ed estende di conseguenza il tempo operativo. Italiano _9 Z6806119901A-SIA-0100Q,0200Q.ind9 9 Z6806119901A-SIA-0100Q,0200Q.ind9 9 2010-06-09 오후 2:05:38...
  • Page 82: Risoluzione Dei Problemi

    Per installare più sensori in modi diversi, utilizzare la funzione di impostazione canali per evitare confusione tra i sensori. 1) Connessione multipla di 1° livello <1 CAN> <2 CAN> <3 CAN> <4 CAN> Italiano _10 Z6806119901A-SIA-0100Q,0200Q.ind10 10 Z6806119901A-SIA-0100Q,0200Q.ind10 10 2010-06-09 오후 2:05:38 2010-06-09 오후 2:05:38...
  • Page 83 "BASSO" in un raggio inferiore al minimo e impostarlo su "ALTO" nel raggio effettivo. Modello BASSO ALTO SIA-0100Q 60 m 60~100 m SIA-0200Q 120 m 120~200 m Italiano _11 Z6806119901A-SIA-0100Q,0200Q.ind11 11 Z6806119901A-SIA-0100Q,0200Q.ind11 11 2010-06-09 오후 2:05:39 2010-06-09 오후 2:05:39...
  • Page 84 Regolazione potenza del fascio (alta, bassa) AGC programmato Temperatura -25˚C ~ 60˚C Ambiente di Lavoro Esterno Materiale Resina in policarbonato Peso 2,500g Grado di tenuta di polvere/d’acqua IP55 Italiano _12 Z6806119901A-SIA-0100Q,0200Q.ind12 12 Z6806119901A-SIA-0100Q,0200Q.ind12 12 2010-06-09 오후 2:05:39 2010-06-09 오후 2:05:39...
  • Page 85 Aspetto Sensore Unità: mm Italiano _13 Z6806119901A-SIA-0100Q,0200Q.ind13 13 Z6806119901A-SIA-0100Q,0200Q.ind13 13 2010-06-09 오후 2:05:40 2010-06-09 오후 2:05:40...
  • Page 86: Corretto Smaltimento Del Prodotto

    Gli utenti aziendali sono invitati a contattare il proprio fornitore e verifi care i termini e le condizioni del contratto di acquisto. Questo prodotto e i relativi accessori elettronici non devono essere smaltiti unitamente ad altri rifi uti commerciali. Z6806119901A-00 Z6806119901A-SIA-0100Q,0200Q.ind14 14 Z6806119901A-SIA-0100Q,0200Q.ind14 14 2010-06-09 오후 2:05:40 2010-06-09 오후 2:05:40...
  • Page 87: Руководство Пользователя

    выполнять, когда изделие получило какое-либо повреждение, например, был поврежден его шнур питания или вилка шнура питания, внутрь изделия попала жидкость или посторонние предметы, изделие подверглось воздействию дождя или влаги, изделие не работает должным образом, а также после падения изделия. Руский _1 Z6806119901A-SIA-0100Q,0200Q.ind1 1 Z6806119901A-SIA-0100Q,0200Q.ind1 1 2010-06-09 오후 2:05:41 2010-06-09 오후 2:05:41...
  • Page 88: Характеристики Устройства

    Видоискатель Точная настройка Регулировка верхнего объектива (верхнего) объектива (вверх/вниз) Блокирующая пленка Разъем для настройки Видоискатель Панель управления Регулировка нижнего объектива (вверх/вниз) Точная настройка Зеркальный объектив объектива (нижнего) (нижний) Руский _2 Z6806119901A-SIA-0100Q,0200Q.ind2 2 Z6806119901A-SIA-0100Q,0200Q.ind2 2 2010-06-09 오후 2:05:41 2010-06-09 오후 2:05:41...
  • Page 89: Комплект Поставки

    Если контактную точку подключаемого датчика изменить с N.C на N.O, инфракрасный датчик дальнего действия перестанет излучать инфракрасные лучи, в результате чего приемник получит непрямой сигнал и загорится "индикатор ретрансляции". Руский _3 Z6806119901A-SIA-0100Q,0200Q.ind3 3 Z6806119901A-SIA-0100Q,0200Q.ind3 3 2010-06-09 오후 2:05:42 2010-06-09 오후 2:05:42...
  • Page 90 38 мм - 43 мм Вставьте кронштейн в форме буквы U и кронштейн датчика. Вставьте кронштейн в форме буквы U в столб и закрепите кронштейн датчика с помощью винтов (4x25). Руский _4 Z6806119901A-SIA-0100Q,0200Q.ind4 4 Z6806119901A-SIA-0100Q,0200Q.ind4 4 2010-06-09 오후 2:05:43 2010-06-09 오후 2:05:43...
  • Page 91 Убедитесь, что другой датчик можно видеть невооруженным глазом. Отрегулируйте положение так, чтобы датчик был расположен по центру. Болт, регулирующий Диск регулировки наклона положение вверх/вниз влево/вправо Болт точной настройки наклона влево/вправо Руский _5 Z6806119901A-SIA-0100Q,0200Q.ind5 5 Z6806119901A-SIA-0100Q,0200Q.ind5 5 2010-06-09 오후 2:05:44 2010-06-09 오후 2:05:44...
  • Page 92 (10 В пост. тока) Напряжение указывает на состояние устройства. Измеренное напряжение Регулировка 2,5 В или выше Excellent 0,5 В - 2,4 В Good 0,5 В или ниже Poor, требуется настройка Руский _6 Z6806119901A-SIA-0100Q,0200Q.ind6 6 Z6806119901A-SIA-0100Q,0200Q.ind6 6 2010-06-09 오후 2:05:45 2010-06-09 오후 2:05:45...
  • Page 93 Лучи будут испускаться под углом приблизительно 1,4°. Типы излучения смотрите в таблице ниже. Расстояние (A) Ширина (B) Ширина (C) 100m 2.5m 2.7m 150m 3.7m 4.0m 200m 5.0m 5.2m Руский _7 Z6806119901A-SIA-0100Q,0200Q.ind7 7 Z6806119901A-SIA-0100Q,0200Q.ind7 7 2010-06-09 오후 2:05:46 2010-06-09 오후 2:05:46...
  • Page 94 Максимальное расстояние (метры) Проволочный SIA-0100Q SIA-0200Q калибр 12V DC 24V DC 12V DC 24V DC AWG 22 AWG 20 1,700 1,500 AWG 18 2,600 2,200 AWG 14 5,370 4,570 Руский _8 Z6806119901A-SIA-0100Q,0200Q.ind8 8 Z6806119901A-SIA-0100Q,0200Q.ind8 8 2010-06-09 오후 2:05:47 2010-06-09 오후 2:05:47...
  • Page 95 5 мин 55 мин (мигание)  В случае срабатывания сигнала тревоги во время отображения другого сигнала, второй сигнал будет воспринят как продолжение первого и время его отображения увеличится. Руский _9 Z6806119901A-SIA-0100Q,0200Q.ind9 9 Z6806119901A-SIA-0100Q,0200Q.ind9 9 2010-06-09 오후 2:05:48 2010-06-09 오후 2:05:48...
  • Page 96: Устранение Неполадок

    Если требуется установить несколько датчиков различными способами, используйте функцию поканальной настройки, чтобы избежать конфликта между датчиками. 1) Многоканальное подключение 1 уровня <КАН 1> <КАН 2> <КАН 3> <КАН 4> Руский _10 Z6806119901A-SIA-0100Q,0200Q.ind10 10 Z6806119901A-SIA-0100Q,0200Q.ind10 10 2010-06-09 오후 2:05:48 2010-06-09 오후 2:05:48...
  • Page 97 избежание появления такого эффекта установите для минимального диапазона значение НИЗКИЙ, а для эффективного диапазона - значение ВЫСОКИЙ. Модель НИЗКИЙ ВЫСОКИЙ SIA-0100Q 60 m 60~100 m SIA-0200Q 120 m 120~200 m Руский _11 Z6806119901A-SIA-0100Q,0200Q.ind11 11 Z6806119901A-SIA-0100Q,0200Q.ind11 11 2010-06-09 오후 2:05:49 2010-06-09 오후 2:05:49...
  • Page 98: Технические Характеристики

    Настройка по звуку Функции Настройка мощности луча (низкая, высокая) Программируемая АРУ Температура -25˚C ~ 60˚C Рабочая среда Внешняя Материал Поликарбонатный каучук Вес 2,500 г Класс защиты от пыли, воды IP55 Руский _12 Z6806119901A-SIA-0100Q,0200Q.ind12 12 Z6806119901A-SIA-0100Q,0200Q.ind12 12 2010-06-09 오후 2:05:49 2010-06-09 오후 2:05:49...
  • Page 99: Внешний Вид

    Внешний вид Датчик Единица измерения: мм Руский _13 Z6806119901A-SIA-0100Q,0200Q.ind13 13 Z6806119901A-SIA-0100Q,0200Q.ind13 13 2010-06-09 오후 2:05:50 2010-06-09 오후 2:05:50...
  • Page 100 обращаться к продавцу данного изделия или в органы местного самоуправления. Промышленным потребителям необходимо обратиться к поставщику, чтобы уточнить сроки и условия договора купли-продажи. Подобные изделия и электронные принадлежности не следует утилизировать вместе с другими производственными отходами. Z6806119901A-00 Z6806119901A-SIA-0100Q,0200Q.ind14 14 Z6806119901A-SIA-0100Q,0200Q.ind14 14 2010-06-09 오후 2:05:50 2010-06-09 오후 2:05:50...
  • Page 101: Kullanım Kılavuzu

    Bütün servis işlemlerini yetkili servis personeline bildirin. Güç kaynağı kordonu veya fi şin zarar görmesi, sıvının dökülmesi veya cihazın içine nesne düşmesi, cihazın yağmura veya neme maruz kalması, normal çalışmaması veya düşmesi gibi herhangi bir şekilde cihaz hasar gördüğünde servis gereklidir. Türkçe _1 Z6806119901A-SIA-0100Q,0200Q.ind1 1 Z6806119901A-SIA-0100Q,0200Q.ind1 1 2010-06-09 오후 2:05:50 2010-06-09 오후 2:05:50...
  • Page 102: Ürün Özellikleri

    Mercek Seviyesi İnce Üst Mercek Ayarı Ayarı (Üst) (Yukarı/Aşağı) Ayarlama için Blokaj Filmi Terminal Kontrol Paneli Vizör Alt Mercek Ayarı (Yukarı/Aşağı) Mercek Seviyesi İnce Ayna Mercekler (Alt) Ayarı (Alt) Türkçe _2 Z6806119901A-SIA-0100Q,0200Q.ind2 2 Z6806119901A-SIA-0100Q,0200Q.ind2 2 2010-06-09 오후 2:05:51 2010-06-09 오후 2:05:51...
  • Page 103 Diğer sensör N.C moduna ayarlanmışsa, 3 ve 4 numaralı (N.C) terminallere bağlayın. Bağlanan sensörün kontak noktası N.C modundan N.O moduna geçerse, uzun menzilli IR sensörü kızılötesi ışınını yaymayı durdurarak alıcıya dolaylı bir bildirim verir ve “Yeniden Aktarım LED’i” yanar. Türkçe _3 Z6806119901A-SIA-0100Q,0200Q.ind3 3 Z6806119901A-SIA-0100Q,0200Q.ind3 3 2010-06-09 오후 2:05:52 2010-06-09 오후 2:05:52...
  • Page 104 Φ38~Φ43 arasındaki direklere uyar. Direk Çapı 38mm ~ 43mm U biçimli kelepçeyi takın ve sensör kelepçesini geçirin. U biçimli kelepçeyi direğe takın ve vidaları (4x25) kullanarak takılan sensör kelepçesini sabitleyin. Türkçe _4 Z6806119901A-SIA-0100Q,0200Q.ind4 4 Z6806119901A-SIA-0100Q,0200Q.ind4 4 2010-06-09 오후 2:05:53 2010-06-09 오후 2:05:53...
  • Page 105 Bu adım, ışın ayarı için sensör konumunu yaklaşık olarak ayarlayan birinci zorunlu adımdır. Diğer sensörü çıplak gözle görebildiğinizden emin olun. Konumu sensör ortaya gelecek şekilde ayarlayın. Yukarı/Aşağı Ayarlanabilir Cıvata Sola/Sağa Ayarlanabilir Kadranı Sol/Sağ İnce Ayar Cıvatası Türkçe _5 Z6806119901A-SIA-0100Q,0200Q.ind5 5 Z6806119901A-SIA-0100Q,0200Q.ind5 5 2010-06-09 오후 2:05:54 2010-06-09 오후 2:05:54...
  • Page 106 “Monitor” etiketlidir. Voltmetre (10V DC) Voltaja göre ürünün durumunu kontrol edin. Ölçülen Voltaj Hizalama 2,5V veya üzeri Excellent 0,5V ~ 2,4V Good 0,5V veya altı Poor, ayarlanması gerekir Türkçe _6 Z6806119901A-SIA-0100Q,0200Q.ind6 6 Z6806119901A-SIA-0100Q,0200Q.ind6 6 2010-06-09 오후 2:05:55 2010-06-09 오후 2:05:55...
  • Page 107 IR Işını Genişliği Işın 1,4°'lik bir açıyla yayılır. Yayılma tipi için aşağıdaki tabloya bakın. Mesafe (A) Genişlik (B) Genişlik (C) 100m 2.5m 2.7m 150m 3.7m 4.0m 200m 5.0m 5.2m Türkçe _7 Z6806119901A-SIA-0100Q,0200Q.ind7 7 Z6806119901A-SIA-0100Q,0200Q.ind7 7 2010-06-09 오후 2:05:56 2010-06-09 오후 2:05:56...
  • Page 108 Maksimum Mesafe (metre) Kablo Ölçeği SIA-0100Q SIA-0200Q 12V DC 24V DC 12V DC 24V DC AWG 22 AWG 20 1,700 1,500 AWG 18 2,600 2,200 AWG 14 5,370 4,570 Türkçe _8 Z6806119901A-SIA-0100Q,0200Q.ind8 8 Z6806119901A-SIA-0100Q,0200Q.ind8 8 2010-06-09 오후 2:05:57 2010-06-09 오후 2:05:57...
  • Page 109: Alarm Belleği

    55 dak (yanıp söner)  Alarm belleği birinci alarm ile çalışmaya devam ederken başka bir alarm verilirse, alarm belleği ikinci alarmı birinci alarm olarak kabul edip çalışma süresini bu ölçüde uzatır. Türkçe _9 Z6806119901A-SIA-0100Q,0200Q.ind9 9 Z6806119901A-SIA-0100Q,0200Q.ind9 9 2010-06-09 오후 2:05:58 2010-06-09 오후 2:05:58...
  • Page 110: Sorun Giderme

    Birden çok sensörü farklı şekilde monte etmek istiyorsanız, sensörler arasındaki karışıklığı önlemek için kanal ayarı işlevini kullanın. 1) 1 Seviyeli Çoklu Bağlantı <1 CH> <2 CH> <3 CH> <4 CH> Türkçe _10 Z6806119901A-SIA-0100Q,0200Q.ind10 10 Z6806119901A-SIA-0100Q,0200Q.ind10 10 2010-06-09 오후 2:05:58 2010-06-09 오후 2:05:58...
  • Page 111 önlemek için, menzili minimum menzilin altındaki değerlerde “DÜŞÜK” olarak ayarlayın ve etkin menzil değerlerinde “YÜKSEK” olarak ayarlayın. Model DÜŞÜK YÜKSEK SIA-0100Q 60 m 60~100 m SIA-0200Q 120 m 120~200 m Türkçe _11 Z6806119901A-SIA-0100Q,0200Q.ind11 11 Z6806119901A-SIA-0100Q,0200Q.ind11 11 2010-06-09 오후 2:05:58 2010-06-09 오후 2:05:58...
  • Page 112: Teknik Özellikler

    Sesli ayar Özellikler Işın gücünü ayarlama (düşük, yüksek) Programlı AGC Sıcaklık -25˚C ~ 60˚C Çalışma Ortamı Dış Malzeme PC reçine Ağırlık 2,500g Toz geçirmezlik, su geçirmezlik oranı IP55 Türkçe _12 Z6806119901A-SIA-0100Q,0200Q.ind12 12 Z6806119901A-SIA-0100Q,0200Q.ind12 12 2010-06-09 오후 2:05:59 2010-06-09 오후 2:05:59...
  • Page 113 Görünüm Sensör Birim: mm Türkçe _13 Z6806119901A-SIA-0100Q,0200Q.ind13 13 Z6806119901A-SIA-0100Q,0200Q.ind13 13 2010-06-09 오후 2:05:59 2010-06-09 오후 2:05:59...
  • Page 114 öğrenmek için ürünü aldıkları perakendecilere veya yerel devlet dairesine başvurmalıdır. Ticari kullanıcılar tedarikçileriyle temas kurup satın alma sözleşmesinin koşullarını ve şartlarını kontrol etmelidir. Bu ürün ve elektronik aksesuarları atma işlemi için diğer ticari atıklarla karıştırılmamalıdır. Z6806119901A-SIA-0100Q,0200Q.ind14 14 Z6806119901A-SIA-0100Q,0200Q.ind14 14 2010-06-09 오후 2:06:00...
  • Page 115 Z6806119901A-SIA-0100Q,0200Q.ind15 15 Z6806119901A-SIA-0100Q,0200Q.ind15 15 2010-06-09 오후 2:06:00 2010-06-09 오후 2:06:00...
  • Page 116 TEL : +82-70-7147-8740~60 FAX : +82-31-8018-3745 SAMSUNG TECHWIN AMERICA Inc. SAMSUNG TECHWIN EUROPE LTD. 1480 Charles Willard St, Carson, CA 90746, UNITED STATES Samsung House, 1000 Hillswood Drive, Hillswood Business Park Tol Free : +1-877-213-1222 FAX : +1-310-632-2195 Chertsey, Surrey, UNITED KINGDOM KT16 OPS www.samsungcctvusa.com TEL : +44-1932-45-5300 FAX : +44-1932-45-5325 www.samsungtechwin.com...

This manual is also suitable for:

Sia-0200q