Receiver
Power 10V ~ 30V DC
Environment Out
•
Alarm Out: The sensor will operate in both N.C and N.O mode
•
Environment Out: This output triggers if normal operation is disabled due to an environmental phenomenon such as fog.
•
LED Out: Turns on the indicator in 5 levels according to the setting. The signal sound will be set in 3 levels by turning on the
DIP switch #3. Once adjusted, you should turn off the DIP switch.
Installation
To attach to the pole
1.
Insert the pole support bracket to the sensor bracket.
Use the screw (4x6) to tighten up the pole support bracket.
You can use the pole support bracket in all sizes between Φ38 and Φ43.
2.
Insert the U-shaped bracket and insert the sensor bracket.
Insert the U-shaped bracket to the pole and use the screws (4x25) to fi x the
inserted sensor bracket.
Z6806119901A-SIA-0100Q,0200Q.ind6 6
Z6806119901A-SIA-0100Q,0200Q.ind6 6
(Nonpolar)
Alarm Out
Tamper
Tamper Switch
English _6
Status Indicators (Memory/Alarm/Environment)
Strength in 5 Levels
Response Time Adjustable Button
Channel Setting (1,2)
Signal Sound Setting (3)
Alarm Memory Setting (4)
Level LED On/Off
Pole Diameter
38mm ~ 43mm
2010-03-30 오전 12:18:33
2010-03-30 오전 12:18:33