Installing The 90° Elbow Assembly - HP MCS 5042 Installation Manual

For more information, see "Attaching the main hoses to the MCS 5042 through the top of the unit (on
page 33)."
Installing the 90° elbow assembly
Insert the Viton gasket into the swivel nut of the union at the 90° elbow assembly.
1.
Hold the 90° elbow in the designated direction (towards the top for installation through the top of the
2.
unit, or towards the bottom for rear or bottom installation), and hand-tighten the 90° elbow assembly to
the MCS 5042 unit.
Hook Up Kit 30